Creality 3D Ender-7 3D Printer
- Brand: Unbranded
Description
Tested with a 164.4 x 164.4 x 245.4 mm vase model When compare the estimated print times on Creality Slicer, it shows 30 hours of the Creative 3D Ender-7 and the printing time of Ender-3 V2 is 44 hours, there is a 14 hours time difference, you did save some print time. Finally, be ready to embrace the learning curve. Watch your prints, learn to spot trouble signs and keep experimenting.
I did run into a couple of issues while testing the machine. As I mentioned before, the Dragon failed about 14 hours into the 15 hour print. It left this beautiful piece of spaghetti though. What I believe happened was the cable protector for the hotend came loose during the print. During assembly, the protector is just shoved into a hole in the top of the printer. The protector came loose, allowing the cables to fall into the gantry, and it must have pushed the hotend causing it to continue printing off the side. A spectacular failure to look at. I’ll probably end up printing a retaining clip to help ensure it doesn’t happen again. With the Creality Ender 7, you can enjoy the fastest 3D printing with up to 250 mm / s with high print quality. With that out of the way, let’s talk about the specs. The Ender-7 is a filament based 3D printer from Creality. It has a build volume of 220 millimeters by 220 millimeters by 300 millimeters. It comes with a 0.4 millimeters nozzle, and uses 1.75 millimeters filament fed by a bowden extruder. This firmware only works if you have the TH3D Ender 7 LCD Conversion kit installed. Get the conversion kit here: TH3D Ender 7 LCD Conversion Kit Board Compatibility #Currently, there are generally three sets of printing speed that 3D printers can support. The first set is has been grouped at around 40 to 50mm/s, while the second set prints at about 80-100mm/s. Meanwhile, the fastest set prints at around 150mm/s. Some printers may even print at a speed faster than 150 mm/s.” The review from All3DP. On the side of the printer is a micro-SD card slot, as well as a USB type-C port for connecting the printer to a computer. Aimed at designers and hobbyists, Creality's fastest Ender is also equipped with a dual motor-equipped Core-XY structure with linear orbital positioning, allowing users to print at speed without sacrificing model accuracy. A new product always is released during the annual anniversary celebrations of Creality. So, the Creality Ender-7 3d printer is our latest high-end Ender series product. Continuation of the Ender-6 high-speed printing function in Ender-7, Continue to work on more speed breakthroughs.
Maintaining the minimalist aesthetic seen in previous Ender machines, the Ender-7 features the familiar dual support frame that continues to provide print platform stability.Many users have been having issues due to odd folder setups on their computers. If you do not follow the below advice the firmware may have issues compiling. Thanks to its unique butterfly-shaped wing ducted cooling fan, the new Ender also draws in 169% more air than previous models, providing the cooling needed to ensure print quality, while its customized nozzle can hold up to 50mm³ inside its melt for smooth feeding, even at high printing speeds. The instructions are pretty clear, and all the tools and bolts are provided. So as long as you can turn an allen wrench, you shouldn’t have any issues assembling the machine. Concerns To avoid too much interference from the outside world, this test uses offline printing to record actual print speeds. Ender-7 actually print this vase model in only 23 hours, which is 7 hours faster than the estimated time, and the Ender -3 V2 printer actually took 40 hours to print the vase.
- Fruugo ID: 258392218-563234582
- EAN: 764486781913
-
Sold by: Fruugo