The Remote Alarm Learn entry feature enables the installer to re-instate the full RF system house code from a single device. Additional devices can then be added to the system and coded accordingly. No external parts are left exposed as the small antenna is fully enclosed within the alarm unit once fitted. Once the alarm is powered up, the RF LED on the side of the alarm device will flash red, blue and green which indicates that the module is correctly fitted and operating. The Ei3000MRF is an optional add-on for use with the Ei3000 series of alarms. It enables wireless interconnection with up to 12 other SmartLINK / RadioLINK compatible devices and supports hybrid communication allowing for devices to be hardwired or wirelessly interlinked. Approvals: RF performance to EN 300 220-1 in accordance with EN 300 220-2, EMC performance to EN 301 489-1 in accordance with EN 301 489-3 Remote Alarm Learn: this feature allows the installer to re-activate the entire RF system House Coding from just one device; additional devices can be added and house-coded accordingly.

Ei3000MRF SmartLINK Module • EI Electronics Ei3000MRF SmartLINK Module • EI Electronics

Functions: when the Ei3000MRF is plugged in, you get wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway (Ei1000G) and Portal. The house coding feature confines the RF communication to designated RF devices only, thereby avoiding the inadvertent activation of neighbouring Alarm RF systems.The Remote Alarm Learn entry feature allows the installer to re-activate the entire RF system house coding from one device. Additional devices can then be added and house coded accordingly.

SmartLINK | Aico SmartLINK | Aico

The Ei3000MRF is an optional add-on SmartLINK module for the Ei3000 series Alarms. It enables the Alarm to communicate wirelessly with other Ei Electronics RF devices. Up to 12 devices can be interconnected. It also facilitates a hybrid communication of hardwired and wireless connections. RF Visual Indicator: Blue light flashes continuously for 0.5 to 3.5 seconds while transmitting RF signalFeatures remote alarm learn entry, allows installer to reactivate the entire RF system house code from one device This is the Aico Ei3000MRF SmartLINK Module which allows for wireless interconnection and data extraction. You can simply plug in to any Aico 3000 Series alarms. The module simply plugs into the designated slot in the base of the Alarm head. On powering up the Alarm, the RF LED on the side of the Alarm will flash red, blue and green to indicate that the module has been fitted correctly. The Ei3000MRF is a short range device which uses a transceiver to receive, transmit and repeat the RadioLINK RF communication protocol. This ensures a robust "mesh" of RF signals and reliable paths of communication. The integrated house coding feature restricts the RF communication to designated RF devices only which reduces interference / activation with other nearby RF systems.