RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

£27.935
FREE Shipping

RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

RRP: £55.87
Price: £27.935
£27.935 FREE Shipping

In stock

We accept the following payment methods

Description

For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. If the oil on the test area beads or sits on the surface, does not dry or remains sticky after 24 hours, it is an indication that the timber has taken as much oil as it can and is not ready for more. This helps to prevent water ingress that can lead to mould and algae, which in turn can become slippery and promote wood rot. After applying the recommended amount stipulated on the tin, wait a couple of days, and try a thin third coat on a small test patch.

Clear decking treatments are designed to nourish and protect decking boards whilst retaining the natural character of the timber. Always read the instructions from the decking supplier as the ‘weathering’ period can vary depending on the type of decking and the species of wood used to make the boards. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour. The microporous finishes are based on natural vegetable oils and allow the wood to breathe and regulated moisture content.Hardwood decking generally requires less maintainance but will still require a thin maintainance coat from time to time. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Thermowood and Thermally Modified Timber (TMT): prone to grey very fast and therefore application is recommended within the first two weeks after processing. These domestic cleaning products are designed to break down and remove oils, stains, and grease from surfaces. This is to remove loose leaves, dirt and other organic matter that can settle on the deck and in the grooves.

If the third coat is absorbed by the deck and dries normally, it is probably OK to apply a thin third coat. For a clear and natural finish for decking, apply just two coats of 007 Teak Oil, which allows the wood to naturally grey over time. Do not apply Barrettine Decking Oil in wet conditions or if rain, frost or snow is likely before the product is dry. Containing UV filters to helps reduce discoloration and fading from the sun, whilst maintaining the finish.

Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Other: woods treated with a varnish, lacquer or other surface coatings must be completely sanded before use. Manns UV Decking Oil cannot be used over decking that has been painted, varnished or treated with a coating type stain.

As a clear top coat for fence panels / screens, we recommend Osmo UV-Protection-Oil/UV-Protection-Oil Extra.The first coat will be rainproof in two hours and after six hours, it will be ready for a second coat. To keep your finish looking its best for longer, regularly clean your deck and remove leaves, mould, mildew, algae and any other dirt. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more.

Hardwood decking is naturally more resistant to weathering, mould, algae, and wood rot, but should still be oiled to waterproof and protect it from long-term weather damage and other biological threats. Choosing the right decking finish, and the one that best meets your needs, can depend on the type of decking you have. Depending on wood species, new or freshly sanded wood requires up to 12 weeks (approximate) exposure to the exterior elements before application. Osmo Oil for Decking: A German manufactured, premium grade deck oil suitable for all softwood and hardwood decking. For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure.Preparation: Decked areas to be treated should be clean, dry and free from dirt, debris and other surface contaminants. To get an indication of how decking will look when oiled, simply wipe over a section of untreated decking with a slightly damp sponge.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop