Our friendly team will be happy to discuss all of your hollow section requirements, so why not give us a call today on 0800 123 70 10 for advice and to get our latest prices. alternatively, drop us a line at: [email protected]

Tiger recognizes that we have here an equation of a straight line. Such an equation is usually written y=mx+b ("y=mx+c" in the UK). Notice that when x = 0 the value of y is 500/1 so this line "cuts" the y axis at y=500.00000 y-intercept = 500/1 = 500.00000 Calculate the X-Intercept :Generally available in 7.500 to 7.650 Metre lengths in Grade 43; however other lengths and grades are available. For your information Kg/m refers to the Kilograms per Metre of the section, as an example a 4.200 Metre length of 48.3 OD x 3.2mm (CHS) Circular Steel Hollow Section (3.56 Kg/m) would weigh (4.2 x 3.56) 14.952 Kg's Total. 21.3 OD x 3.2mm (CHS) Circular Steel Hollow Section (1.43 Kg/m)

To convert from percent to decimal, divide the percent by 100. Dividing by 100 will shift the decimal two places to the left.Generally available in 7.500 to 7.650 Metre lengths in Grade 43; however other lengths and grades are available. For your information Kg/m refers to the Kilograms per Metre of the section, as an example a 4.200 Metre length of 40 x 40 x 3mm (SHS) Square Steel Hollow Section (3.45 Kg/m) would weigh (4.2 x 3.45) 14.49 Kg’s Total. AAD2428 PROGRESSIVE VALT – 65mmX550-670lbs (65mm spring will work with 70mm stroke. Preload should be limited to 5 full turns). As mentioned in the Percent to Fraction section, both the numerator and denominator can be changed to different values. Slope is defined as the change in y divided by the change in x. We note that for x=0, the value of y is 500.000 and for x=2.000, the value of y is 550.000. So, for a change of 2.000 in x (The change in x is sometimes referred to as "RUN") we get a change of 550.000 - 500.000 = 50.000 in y. (The change in y is sometimes referred to as "RISE" and the Slope is m = RISE / RUN) Slope = 50.000/2.000 = 25.000 Geometric figure: Straight Line For fractions, the numerator or denominator and be calculated if desired. Clear both the numerator and denominator. Enter a value into the numerator or denominator. Enter a value into the percent box or decimal box. The blank box in the fraction either the numerator or denominator will be calculated.