£9.9
FREE Shipping

Teltonika FMB920

Teltonika FMB920

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

After successful SMS configuration, FMB920 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.

Configurator suitable for: FMB920, FMB900, FMB910, FMB001, FMB010, FMB110, FMB120, FMB122, FMB125, FMB130, FMB202, FMB204, FMB962, FMB964, FM3001, FMT100 CONFIGURATOR VERSION The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +6..+30V DC. Fix Status - Fix/No Fix. (Note: Fix time strongly depends on indoor/outdoor location. To achieve best performance acquiring GNSS fix device should be used in outdoor locations) NTP server 1 and NTP Server 2 let the user select which NTP server (s) will be used to re-synchronize time.Example: DIN1 and Accelerometer are selected as the Ignition source. When the device detects movement, Ignition status will change to 1, regardless that DIN1 value is 0. Users can select movement start and movement stop delay time - those parameters are used when the accelerometer is selected as an ignition source. LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynomial which is needed to convert sensor values to liters: Main calculations of separate HDOP/PDOP values of GPS, GLONASS, Galileo and BeiDou are made by GNSS modem. GNSS Modem already outputs average of HDOP/PDOP from 4 GNSS systems (Used satellites) with a formula below. Power-up FMB920 with DC voltage 6-30 V power supply using power cable. LED’s should start blinking, see “ FMB920 LED status”. Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen.

Changed setdigout command response to "DOUT is disabled from CFG" if DOUT is disabled configuration This feature will be used to save power consumption of external battery (power supply). It let the user choose one of four power saving modes which he would prefer: GPS Sleep, Deep Sleep, Online Deep Sleep and Ultra Deep Sleep. Also, after the mentioned options you can find the Timeout (min) parameter which starts counting when the device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, the device goes to sleep mode. Accelerometer - if movement sensor detects movement - ignition is ON; if movement is not detected - ignition is OFF;Ignition detection Digital Input 1, Accelerometer, External Power Voltage, Engine RPM (OBDII dongle) Improved SMS/GPRS command "setdigout" with speed parameter according to documentation (do not trigger DOUTx if GNSS FIX unavailable) Important! If Auto calibration is disabled, the device should be mounted according to the User manual for EcoDriving feature to work properly. If enabled, AXES will be reoriented to VEHICLE axes according to the User manual (+X – Forward, +Y – Left, +Z – Down).



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop