However, if you are looking for something with more features that cabinet makers and professional woodworkers may need, then you may have to look elsewhere.

Adjusting the bevel of the blade is simple thanks to the easy-adjust miter gauge, which works in increments of 1-degrees; towards the table top on the right of the miter gauge is a micro-adjustment knob, which allows you to make those micro-adjustments to your bevel angle. The loss of accuracy in angled cuts and largely plastic construction reduce the premium feel usually offered by Dewalt. DW745 model has been replaced by DWE7485 but is still used by many. It was replaced as it didn’t have a 10-inch blade anymore even though it features the same as a DWE7491. Can You Add A Dado To A Dewalt Dwe7485?I have a tendency to leave my tools scattered all over, which results in me searching for them frequently. Having all of them in one place saved me this trouble while giving me the option to keep them secure when taking it out of my workshop. While it’s small, the power output is still incredibly impressive, and it shows in the rip cut, easily making others of the same size or bigger; not once during my use did I feel like I needed more power, and I think that’s partially to do with the smaller kerf of the blade.

Can you cut vinyl flooring with a miter saw? Frequently Asking Question 1. What Is The Lowest Price For Dewalt Dwe7485? You can get 24.5-inches of rip capacity to the right of the blade. That can handle four by eight sheets of plywood or OSB. Cabinetry could challenge that capacity if it is large enough in size.

The main difference is in the blade size, where the DWE7480 has 10-inch diameter blades and the DWE7485 has 8 ¼-inch diameter blades. So, the former version is very powerful with a large rip capacity than the other one. But the new model is getting more popular since the older one is quite bulky. 6. Why Choose The Dewalt Dwe7485 Modular Guarding System? All of this is designed within DEWALT’s Modular Gaurd System. MGS has been an industry standard for a few years now and it allows you to disconnect pieces without having to remove the entire system. This system also allows for tool-free adjustments. The table saw uses a rip fence to keep lumber aligned and straight during the cut. Both circular and miter saws need alignment with each pass and stops for repeated cuts. Saw guides can be time-consuming to set up for additional cuts, while a table saw can make the same cut again and again. This feature was very helpful in maintaining the cleanliness of my workspace, especially over long hours. I had two options to collect the chips produced while cutting. I spent some time online researching what others thought about the DEWALT DWE7485. There were quite a few positive opinions expressed in places like the Reddit community threads.

A table saw allows you to make a cross or rip cut on larger boards. Miter saws are limited to the reach provided by their arm, while a circular saw will drift off the line without a guide. The first time I switched on this motor, I was amazed by its power and smoothness. It took absolutely no time to reach its no-load speed, proving to me just how efficient the design of the motor was. A secondary dust port can be found underneath the table saw; this is a larger opening that’s designed to handle shop-sized dust extraction hoses; this dust collection point will suffer less from interference than the dust collection mounted on the blade guard. Safety Components Safety features typically begin with the blade guard; this one is clear, so you can easily see the contract between the blade and what’s currently being cut. Though you will need to clean it regularly to keep the view unobstructed.Dwe7491 Fence Adjustment: The fence is measured out carefully with a dial indicator on the meter gauge. Then the bolts are used on four sides to clamp in place accurately and tightly for the perfect alignment. The DWE7485 has a 5/8-inch arbor. This is a common size and should not present issues when shopping for blades. 4. Dust collection This is also developed for accuracy with fence support and other excellent features. For efficiency, the motor in this one runs at 15 amp, along with 5800 RPM speed for various applications. This was further helped by the fact that the tool weighs just 54 lbs. It was hard to believe that a table saw could weigh so less initially. Trust me though, the DWE7485 is actually this light and portable, even with your tools and accessories safely stowed away in the onboard storage. After all the features I have listed out, you might think I spent a fortune buying this saw. However, I myself was surprised at the bargain I got while buying it. This table saw is very competitively priced, considering the great facilities and features offered to the customer.

This is a portable, and compact table saw; its dimensions are 22.75 x 13 x 22.75 inches. This thing is small! This is great; you can store this table saw where other table saws can’t be. There is a downside to this, and that’s its table size; it is smaller than others. We cannot use a dado blade on the DWE7485 table saw, even though it works for other DeWalt models. This is because the blade size of this table saw is smaller than 10-inch. What Size Blade Does A Dewalt Dwe7485 Take?Stand design allows portability when the table saw is attached to the stand which increases productivity Fence system provides 622 mm of rip capacity in a portable design for cutting large sheet materials to size Dewalt Dwe7491 Replacement Fence: DEWALT 514013598 fence is made of quality materials to provide support and can be bought separately to work as a replacement fence for the dwe7491 model. Any DeWalt table saw, regardless of the blade size, is suitable for various applications. Mostly, people use a table saw for ripping, cutting boards, joints, rabbets, or grooves, crosscutting, kerfing, and so on. 4. Is Dewalt Dwe7485 A Good Table Saw? It has similar features with other larger and previous models, yet is compact for storage, and also, portable.