You can link the stat out but tbh always better to remove the stat compleatly from the wiring center. Just moved into a new build and I'm trying to learn a bit more about the controls for the central heating. If, however, you’re new to Hive and we have no historical data to base your forecast on, we’ll enter a learning period that takes a minimum of 30 days.

With Geolocation, Mini knows if you’ve gone out and left the heating on – and sends you an instant reminder to turn it off.

Plus, with Integrated Weather, you can see how changes in the outside temperature affect your consumption and how long it takes your home to heat up. Please note that we don't offer pro installation on oil boilers so we recommend that you purchase self install and contact an OFTEC-qualified engineer to install the thermostat.

Designed to attach to the Hive Active Thermostat's base plate via 3 M4 pan head bolts (see picture) - 6-10mm long should work fine (I use 12mm in the picture as I happened to have some lying around). I know the boiler end of the wiring is fine and my boiler is already set to constant as my existing receiver works just fine. Total time about an hour, now have thermostat in a room where it is more effective, and a lot more control of usage. I needed to install the 'receiver' on the boiler end - not a tricky job as it already had an older version (not Hive) and the six pins (I think there were six) were all numbered with what seems to be a standard numbering system. If your internet connection goes down, your Hive Thermostat will continue to work with your thermostat switching your heating on and off as normal.I want to swap my existing Honeywell BDR91 wireless thermostat receiver on my combi boiler for the Hive receiver. you need to see what terminal does what so you turn the receiver over to see if there is a pin out on the back like most timers, there is but it helpfully has a picture of the pins with 1 2 3 4 under them, ******* useless.

Changing to hive or tado or something else might be the answer, but if I can get the basic functionality needed just with a different model of what I've got then I hope that'll be simpler. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. The heat produced from underfloor heating ensures an even distribution of heat in rooms, so it’s one of the most energy-efficient ways to heat your home. I'm not sure, but it also looks like the ESi series 6 use the same style of connector so that might work.On the device, you can set the target temperature, change the modes for the heating and hot water and use the boost feature. We don't have a magic ability to collect every single deleted review; we can only identify reviews as deleted if we collect them on one date and then notice they are no longer visible on a subsequent date. If your boiler works with a standard room thermostat and / or programmer then a Hive Thermostat can control it.

Heating Efficiency Alerts uses your thermostat data to help ensure your home is warming up efficiently. Depends what A and B go to in the boiler, the twin channel will only output 230V to the heating on terminal and if the grey and earth wires go to the 24V bus in the boiler bad and expensive things will happen to it.

You’ll need to be competent in electrical wiring and DIY to install a Hive Thermostat Mini yourself. Get peace of mind knowing that, as long as you subscribe to our Hive Heating Plus service, your Hive heating products are covered for the long-term. Backplate and existing wiring meant straight swap (Backplate was a bit of a squeeze, so swapped for new one anyway, as easy to do).