Plasterboard Fixings– When hanging anything heavy from a plasterboard wall, it is always better to use more fixings than you might normally need. Using four plasterboard fixings instead of, say, two fixings, will greatly help to spread the load of the wall unit, shelf, etc, and therefore reduce the chance of the fixings pulling out of the wall.

4 Pack Carbon Steel Plasterboard Ceiling Hooks Screw-in Wall

When using spring toggles, you will need to remove the spring part from the machine screw and then pass the screw through whatever you are fixing (cabinet, etc) before re-attaching the spring toggle and pushing it into the hole in the plasterboard. I have a potted plant (approx 5kg/10lbs) that I wish to hang from a drywall ceiling of a window aisle.Use an electric drill to drill a pilot hole into the ceiling joist. The pilot hole will allow you to screw the hook screw into the ceiling by hand without it binding up or breaking [5] X Expert Source Gino Colucci There are various sizes of hook screws. If your item is small, use cup hooks or, even smaller, screw eye hooks.

Ceiling Board Hanger - The best way to install plasterboards

If you have trouble twisting it through the last few rotations, grasp the hook gently with pliers and use the pliers to gain added torque. Decide where you’ll be installing the ceiling hook for your plant and make a small mark with a pencil. Step 2Take particular care to drill accurately sized holes when using poly or nylon toggles. Plastic or nylon poly toggles are suitable for light to medium loads such as lighting fixtures. Poly-toggles or nylon toggles work in a similar way to the plastic expanding anchors above. Metal Spring Toggle Select a drill bit that is about the same diameter as your hook screw's threaded shaft, but smaller than the outer threads themselves. I have previously attached shelves and all kinds of things to drywall WALLS, no problem, and also reading here I mostly found about attaching/hanging things to/from walls, too, but I am a bit concerned about how much would a drywall plate be able to hold something hanging straight down from it.