Plug the Bluetooth adapter into the audio output port of your RCA projector. Ensure a secure and snug connection. If the adapter uses RCA ports, match the colors (red to red, white to white). Codec Selection: If your device supports it, you may have the option to choose different Bluetooth audio codecs. Experiment with different codecs to find the one that offers the best audio quality and stability. To make your speakers Bluetooth capable, you will need a Bluetooth receiver. A Bluetooth receiver takes a wireless Bluetooth audio signal and converts it to a line-level electrical audio signal. A line-level signal is a low voltage signal that is resistant to noise. This is the same signal you will get out of a preamp, laptop, or cellphone.

Ensure the audio output is set to the Bluetooth device you paired with the RCA projector. Some devices may offer an option to select the audio output device within the media app itself. Can we convert non-Bluetooth powered speakers and non-Bluetooth stereo receivers to Bluetooth as well? Bluetooth TV adapters come in a wide range of prices and types, with a few variations on design and abilities. Some also include receiver mode, which lets you send audio from your phone, tablet or computer; connect the adapter to a pair of wired headphones and you’ve got yourself Bluetooth headphones. Sound Quality: Some devices provide options to adjust the sound quality for Bluetooth connections. Select the highest quality setting available to enhance the audio experience.Once the pairing is successful, the device will indicate that it has connected to the RCA projector. You should now be able to stream audio wirelessly from your device to the projector. The Marmitek BoomBoom 55 Bluetooth transmitter is powered via its micro-USB port by either connecting the power cable to a USB port or using the included mains adapter. Ideally, these internal wires will be color-coded in accordance with the speaker clips. However, if they are unlabelled, it should not make too much of a difference, since audio signals are alternating current.

Where you may run into trouble is with the speakers themselves. Speakers generally come with one of three kinds of connections. The easiest to hook up to a Bluetooth device with be RCA, since most Bluetooth receivers have RCA outputs and therefore only require standard RCA cables to plug in. If your audio source is not equipped with a USB port, the Marmitek BoomBoom 50 Bluetooth transmitter can also be powered by an external USB power charger (5V, 500mA, not included) thanks to the included USB extension cable. If you are using a car audio Bluetooth receiver, you will need to get a converter cable. You will need to find a cable with a female aux connection on one side. If you have speakers with an RCA connection, finding an aux female to left and right male RCA cables is usually not too difficult. However, if your speaker has speaker clips or uses banana plugs, it may be more complicated. Banana Plugs and Speaker Clips Powered speakers have their own external power supply. Powered speakers use this power supply to add voltage and current to the line-level signal. Because of this, you can plug a Bluetooth receiver directly into a set of powered speakers. Ensure that the Bluetooth adapter is powered on and in pairing mode. Refer to the adapter’s user manual for specific instructions on how to enter pairing mode if needed.So it is important to make sure that your wireless speakers are Bluetooth compatible to connect them to a Bluetooth turntable. How do we make a non-wireless turntable wireless? Remember to keep your devices within the recommended Bluetooth range and ensure that your Bluetooth adapter is charged if required. Additionally, stay updated with the latest software and firmware updates for your devices to benefit from any performance improvements or bug fixes. What?s more, the Marmitek BoomBoom 55 Bluetooth transmitter can be simultaneously associated with two pairs of wireless Bluetooth headphones. Practical for listening to a program with a friend without bothering those around you.

Although you can find RCA to speaker wire cables, they are not very difficult to make yourself. Simply take a standard RCA cable and cut off the plug on one side. By adjusting the Bluetooth settings on your device, you can optimize the audio quality and ensure a stable connection between your device and the RCA projector. In the next step, we will test the connection and make sure everything is working as expected.

Hook up the left channel to the positive terminal on one speaker and the right channel to the positive speaker of the other speaker. Then hook up one of each of the ground extensions to the negative terminal of each speaker. Pair with Bluetooth Receiver