NOTE: Expert users may diagnose the water problem in their Delonghi coffee machine by listening to it during startup. The noise generated can offer clues about the source of the fault. Issue 6: Noisy Delonghi coffee maker Lubrication: Apply grease to moving internal components such as the brewing group or the auger in superautomatic coffee machines. This can help reduce friction-related noise. If you are going for a milk-based drink such as a cappuccino or a latte then you will need to use the steam function to heat the milk up. Simply press the steam button on the front of the machine and wait till the light comes on which indicates the temperature is high enough for pressurised steam. Turn the steam dial on top to make sure sufficient steam is coming out of the steam wand on the side.

In addition to the troubleshooting guides for specific Delonghi coffee machine types, here are the most common problems affecting any Delonghi coffee machine. Despite the fairly basic functionality, this coffee machine does have a 15 bar pump which is the same pump you will find in a lot of Delonghi’s more expensive machines so it will deliver a good cup of coffee. Ease of use 10/10 Let’s focus on troubleshooting the milk frothing system in your Delonghi coffee machine, whether it’s a simple tube or a more complex cappuccino or milk tank system.These are great space-saving machines that are an excellent option for those with limited countertop space. If you’re ever in the mood for a good old-fashioned hot chocolate, you can use the steam wand to produce hot water by pressing the “dispense water” button and then delivering the water through the tap. There are 3 buttons on the front which controls the operation of the entire coffee machine. The first is the on/off button, secondly the water/coffee delivery button and finally the steam button. The De’Longhi Scultura does not accommodate large coffee cups or mugs. The coffee spout is set low such that only an espresso glass can fit underneath. Obstruction in the group head: Sometimes, an obstruction within the group head, the part of the machine that connects to the portafilter, can impede proper insertion. Carefully inspect and clean the group head to remove any obstructions.

When the Gaggia had been repaired to the point we had to start paying to fix it, we moved onto a DeLonghi Scultura (please don't @ me - it does enough for us) and it's been fine for 4 years. Then a few months ago the steam wand started dripping whenever we we running the regular brew button, and then yesterday there was a sudden change of note when the pump was running, and all of a sudden water was coming from many places it definitely shouldn't have been, and none where it should. I'm assuming a pipe has popped/gasket split or similar. My passion for coffee has led me to research and study far beyond the obvious and thanks to that I can offer solutions and bring news about coffee and coffee machines. Small conveniences like the cup warmer (to pre-heat your cup), a larger drip tray, and speedy milk frothing make this machine hard to look past as a cost-effective beginner’s machine. It’s all about the beans! The 15 bar pump will deliver the goods but it won’t taste very good if you don’t use good quality coffee. There isn’t much room to play, and with a simple option like this, there’s a higher chance of your having to upgrade coffee machines sooner. De’Longhi Scultura ECZ351 vs. De’Longhi Dedica — an Honest ComparisonVariation in noise: Some coffee makers are naturally noisier than others. Understand that the noise level may not necessarily indicate a malfunction in your Delonghi machine. The Scultura is the winner when it comes to texturing milk. Perhaps it’s a shorter milk wand that makes it slightly longer to perfectly froth. Different Espresso Quality Yes, it can. To make an Americano set the steamer to produce hot water instead of steam. Add the hot water to your prepared espresso to make an Americano. 3. What size of cups can you put under the coffee spout?