The abrasive mop included in Klingspor’s product selection is a valuable tool for work that involves such steps as sanding or finishing surfaces. Craftsmen and do-it-yourselfers who choose an abrasive mop from Klingspor’s extensive program range will buy a tool that serves their needs perfectly and offers them supreme quality at a competitive price. If you sand with Klingspor, you will always sand like a pro.

If you want to achieve the best possible results with your KM 615, you need to choose the right speed for your grinder, drill or flexible shaft. For safety reasons, the maximum permissible speed and also the maximum exposed clamping length must not be exceeded. On the other hand, the operating speed must not be too low. If working with an insufficient speed, the tool pressure will cause the abrasive flaps to flex too much on the workpiece. This will extend the area of the abrasive surface. The friction generated between workpiece surface and abrasive flap will, in turn, increase significantly. The increase in friction will heat up both, causing the abrasive flaps to wear out faster. The workpiece surface will not show the same scratch pattern, a deviation compared to that of using an optimal speed (20 - 25 m/s) . Also important for safety reasons is to keep the exposed shank length under 20 mm, which needs to be ensured when you mount the tool. The difference between an abrasive belt and an abrasive mop The synthetic resin multibond is responsible for the high removal rate the KM 615 is guaranteed to deliver. The multibond allows for cool grinding and fast processing times. This small abrasive mop is used for Once the cutting locations were marked, I marked the center for each 8" strip and cut a small X on each center with the utility knife. This is the location where the future sanding mop shaft (the carriage bolt) will be inserted through.I then cut 1" long slits on each side of the 8" cut marks - 2" cuts in total length spaced 1/4" apart using the utility knife. Leaving nothing to be desired, the exhaustive selection is sure to hold abrasive mop wheels that can be combined with machines used in industrial enterprises, metal workshops or handicraft businesses and in do-it-yourself applications. I started by stretching out the emery paper, abrasive side down, and duct taped each end to keep it stable while prepping it. An abrasive mop made by Klingspor is a popular choice across a wide variety of applications. These include Anyone using abrasive mop discs does so because they need a product that matches their specific use case perfectly. This is why Klingspor offers their customers specialised products with a quality that is sure to help the user overcome even the most difficult problems. One such product is the FDR 618. This pleated mop has been designed specifically for work on joints, grooves and slots and delivers exceptional results. Arranged in pairs, the pleated flaps let the user work in areas they had never expected to reach, as the flaps will stretch out into every corner.

Scott ,Those are the biggest king daddy sanding mops i ever seen .Man alive i'd like to try one.I make my own and don't find cloth sandpaper that much to build a whooper like yours.I found a 1.5" dremil in the store once and never again.It shows up here once in a while ,very small.Another thing i found works good is a wheel with bristles on it .I don't know if it was used for polishing but it too works great as a sanding mop for the fuzzys.Its late so i'm only getting the mops i know they are. IMG_20160725_235853.jpg IMG_20160725_235858.jpg IMG_20160725_235917.jpg IMG_20160725_235908.jpg The abrasive mop wheels, small abrasive mops (also referred to as mounted wheels) or satin finishing drums also demonstrate their versatility when it comes to the equipment with which they can be paired. This equipment includes such machines asIf the machine is not equipped with speed control, the selection of the product must be made based on the specified speed. Klingspor has these machines covered as well and offers abrasive mop wheels that will operate in the optimum range. These properties are typical of abrasive mop wheels Just as all other abrasives made by Klingspor, the abrasive mop wheels will produce scratch patterns that are one of a kind and marked by long, continuous grain patterns in the treated surface. Scratch marks left by the processing with the abrasive mop will be minimal, making the finish particularly smooth. It is therefore possible to use these products for professional surface refinement that will live up to the highest standards.