The PRO-KLEEN TROLL’S BREATH immediately begins to turn a deep purple colour as it gets to work dissolving the brake dust particles. The more purple it goes, the more iron fallout is on the wheels. It naturally “pulls” in a downward direction under gravity, pulling iron contamination away from the wheels. These iron removers are some of the best products for removing iron particles from your car but to make the job even more effective try the following; It could be used on all surfaces but wheels were the most popular application due to the high ferrous content that brake pads and brake discs would expel. Are your wheels chromed or anodised? If so, choose a pH-neutral product that won’t damage their delicate surface. Each cleaner advises what types of wheels they are suitable for. Gradually, brake discs and pads contaminate wheels (and paintwork) with iron deposits causing them to look dull and potentially causing damage over time. Using Dragon's Blood, you can remove all iron contamination from your wheels, paintwork, glass and more and restore the shine they once had.

Usually I'd clean the wheels in the manner I said above and then seal them and use ph-neutral wheel cleaner as part of the regular maintenance wash routine, only using fallout remover every 6 months or so. Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working. I have used it on aluminium, painted aluminium and steel wheels and if you take care not to leave it on for more than 6 minutes no damage to the wheel is done. Like I said before, this will really come in handy on german, luxury or heavy vehicles where iron contamination will be high. The solution was easily sprayed onto the wheels and needed time to soak into the baked-on brake dust. To simply leave and rinse in all fairness would not completely clean off any long term “baked on” brake dust and I would be forced to re-apply or work hard with a soft brush to break under the sealed layer of brake pad debris. The “debris” is caused by a build-up of fine brake pad particles. Under the heat of braking, these particles get baked onto the alloy surface. At first, this isn’t too noticeable, but over time it’ll start to show up as a dark grey film known as iron fallout which is nearly impossible to wash off with car shampoo.Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working. More importantly, this chemical reaction also turns iron into a water soluble solution which makes it easy to rinse away baked on brake dust. For the most part Dragon’s Breath will easily clean general road grime away without a need for agitation, however the stubborn baked on brake dust may still require some agitation for the best results. Directions: Despite the strong smell, it worksvery well and was instantly a must-have product in any detailers line up. Spray the gel/liquid formula directly on to your wheels. Allow the product to settle and dwell for approximately 5-10 minutes. Once the liquid has changed from clear to a shade of purple then rinse the wheels clean with warm water. If necessary, reapply the solution again and agitate with a soft brush. Dragon'sBlood is a legendary iron contamination remover that powers away dirt and discolouration from your alloys, wheel trim, paintwork, and even your mirrors! With a unique, max-strength formula and colour changing indicator,

Like most other formulas, rinse off or even wash off any other dirt from the affected surface making it easy to see the contamination. Then spray enough fallout remover to wet the surface and watch the surface turn purple and ‘bleed’.Now you have a list of the best iron removers we have used for our professional detailing services and hope you find these products useful in rectifying a problem or simply used to keep your car looking mint. This is set by Hotjar to identify a new user’s first session. It stores a true/false value, indicating whether this was the first time Hotjar saw this user. It is used by Recording filters to identify new user sessions. It even degreases the engine compartment. Dont leave it on plastic or rubber surfaces too long, just in case, not that I have seen any damage in the last 2 years I've been using it. Car care technology has rapidly developed over the last few years and the use of iron removers is now one of the most popular products in car detailing. Removing fallout use to require the use of oxalic acid to break down and break apart the ferrous metal from the affected surface, usually paint, wheels & glass but have now been developed so that you no longer require an acidic fallout remover but a completely safe PH neutral formula which is even more effective than its acidic rival.

This competition gives us two of the best iron removers for detailing and are both very good choices if you are looking for one to buy.Spray onto wheels, leave to dwell but not dry, and rinse thoroughly ValetPRO Dragon's Breath Wheel 5 Litre Cleaner Fact Sheet Don’t let dull, grimy alloys drag your car down. Use the power of the Dragon to get your wheel trims looking pristine – it’s pH neutral so you can use it on all kinds of alloys, paintwork, and glass, too! How to Use Dragon’s Blood

ValetPro Dragon's Breath is a iron fallout and contamination remover designed to remove stubborn brake dust and environmental fallout from wheels and paint. Valet Pro Dragon's Breath works unlike other iron contamination removers as its a think gel once sprayed and so doesn't run off from where you want it working. You can watch it at work as it causes a chemical reaction that makes this clear liquid change colour to a brilliant red, proving it's working on even seemingly clean surfaces. ValetPRO Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working.There are sufficient warnings on the bottle to indicate that the PRO-KLEEN product is corrosive and harmful to the eyes and skin, so always consider the direction and strength of the wind when applying. Wear safety goggles/ a face covering and gloves for additional personal protection. Always read the instructions to obtain the safest and most effective results. A freephone telephone number is also present on the bottle in case of a medical emergency along with hazard warning diagrams. A technical sheet is also available from PRO-KLEEN. Budget: Prices vary widely, although you don’t need to spend a lot for good results. You simply need to find the best products. That work has gladly been done for you by us. As a wheel cleaner it is one of the best available today. It is safe on ALL wheel types, including cars with carbon ceramic brake systems. It also boasts being PH neutral, water based & effective at removing iron contamination.