If the device is "hidden" that means Windows thinks it is not connected. Either unplug and replug the device, reboot, or forget about it because it probably isn't the same device. The device strings are different and that comes directly from the device and isn't likely to change. Sometimes the USB hub just stops working. Reboot is usually the best solution. They can shut off if something attempts to draw too much power. Since a playstation 2 controller expects a 7V input for the rumbler and USB output 5V, I wonder if the converter just disables the rumbler or if it has a voltage converter. The total draw may still exceed the amperage your USB port can put out (supposed to be 1A but most PC USB2.0 ports can only do about 1/2 of that). In FLIP remember to select the target device as Atmega8U2 or 16U2 depending on you Arduino and, from select the communication medium choose USB and finally Load the correct hex file before selecting run. The first step in connecting your PS2 controller to your PC is to gather the necessary hardware. You will need a PS2 controller, a USB-to-PS2 controller adapter, and a USB cable. The adapter can be found online or at a local electronics store, and the USB cable should come with your controller. Once you have all the necessary hardware, you can move on to the next step. Drivers and Software Installation The Controller to USB may try to connect as a Serial port and work as an emulated serial port. The driver you installed may have uninstalled the microsoft usbserial driver. This is the usbser.sys driver. It should reinstall itself with a reboot. This would be the case if the device class looks like \Class_02&SubClass_02

PS2 controller to USB Adapter? - PC Gaming Whats the best PS2 controller to USB Adapter? - PC Gaming

If you ran into a driver error, go to windows device manager and select to search for the unknown driver inside the installation directory of FLIP '\Program Files (x86)\Atmel\' Before updating the Atmega8U2 or 16U2(UNO Rev3) to identify our Arduino as a USB keyboard we should make sure all the conversion stuff is working correctly and the final final sketch is uploaded or otherwise it will be a major pain to keep over-writing the firmware again and again between the Original and USB-keyboard hex files just so you could upload the correct sketch. This becomes especially true if you don't have any external programmer like a USBasp or another Arduino to use as a ISP. So here we will upload a 'DEBUG' version of the final sketch with a human readable output(through the serial monitor) to test things out. If you're using a Linux distribution like Ubuntu, the EyeToy should be supported out of the box. Simply plug it into a free USB port and it should be ready to use. This may differ from distribution to distribution, but with a little searching, you should be able to get it working.A: Due to technical limitation (maximum number of USB endpoints in the chip the adapter uses). But we have a workaround for this that will be part of a future firmware. I have a cheap USB to playstation 1 / 2 adapter that I was trying to get working using some drivers. So after trying a basic rewiring it didn't work so there has to be some conversion going on but what? The puzzling thing is going from USB to PS/2 works but going the other way doesn't work. Why?

USB controller on the PS2? : r/ps2 is it possible to use a USB controller on the PS2? : r/ps2

If you find the correct drivers for your controller to USB device, anything else you do may not matter. That would be the first thing I'd try. Once Xpadder is installed, connect your PS2 controller to your PC via a USB cable. Xpadder should automatically detect the controller, but if it doesn’t, you may need to go into the program’s settings and manually select the controller from a list of connected devices. With the controller connected and configured in Xpadder, you should now be able to use it to play PC games. Now, if I view Hidden Devices in Device Manager, I can see the 'old' devices from earlier, Device HID\VID_0810&PID_0001&Col02\7&750e0c&0&0001 was configured. Connecting Playstation 2 to a PC via USB is now possible, allowing gamers to play their favorite PS2 games on their computer. It’s a great way to bring classic gaming into the modern age, and with just a few simple steps you can experience the nostalgia of playing your favorite titles again. Here’s how to easily connect your PlayStation 2 console directly to your PC:

and if you press new key d with value 'nn' without releasing key a or key b your output should change to, Only the buttons also present on normal controllers work (i.e the lower part of the remote, excluding the ENTER button). The polling interval must also be set to 16ms or longer. Finally you can update the firmware of your Arduino to register it as USB keyboard. For this I'm not going to go into much details as it will make this instructable too long. All of these uses for it are things that I use it for. Besides my Super Joy Box 5 Pro, I also have an older Super Dual Box. I bought it sometime around the beginning of 2004 to use my two RedOctane Ignition pads on my PC for StepMania. It works fine on my older computer, but when I got my new computer last year I found that there were some problems with it on my new computer. The specific problem is in that to use the DDR-style pads, you need to input a code to change the button assignments internally in the adaptor, but on my new computer the adaptor would sometimes reset itself and make it so the code needed to be put in again; this would happen while playing and was very annoying.

ps/2 to usb convertor for old keyboards How to make your own ps/2 to usb convertor for old keyboards

A: Not at the moment, but we could support them with a future firmware. Please let us know if you are interested. After you have installed the necessary software and drivers, you will need to configure your PS2 controller to work with your PC. This can typically be done through the software that you installed. Most software will have an option to configure the buttons and sensitivity of the controller, as well as any other settings that may be necessary. Testing the ConnectionOnce you have configured your PS2 controller, it’s time to test the connection. Turn on your PC and start up the software that you installed. Connect the USB cable to the controller and the adapter, and then plug the adapter into your PC. If everything is working properly, the software should recognize the controller and you should be able to use it to navigate your PC. Troubleshooting Tips For each new multiple modifier key-press you should get a newline with different values for 'xx'. Finally when you release all modifier keys 'xx' should become 00.