You'll also want to use a blade with as many teeth as possible. This will reduce the risk of the MDF chipping as you saw through it (but it will make more dust so always wear the correct safety equipment!).

Mitre Box - Screwfix Mitre Box - Screwfix

Measure and mark your wood– The first thing you need to do is to measure and mark the cutting position on your piece of wood. To create a skirting board corner joint, using your protractor or angle measurer, measure the angle of the corner required. If the total corner angle is 90 degrees, then you will need to cut 2 45 degree angles.

What is an External Angle/Corner?

Once this is done, you can prise the unwanted piece off and clean up the edges to make it more aesthetically pleasing. For the first piece of skirting board, cut a 45° mitre out from the wall and the end of the current piece. You can now fix this piece to the wall. With your next piece, measure it up against the piece already fixed to the wall, and mark a complementary 45° angle on the top of the skirting (plus, whatever cut needs to be made at the other end of the board).

to Cut Skirting Boards with a Mitre Saw How to Cut Skirting Boards with a Mitre Saw

With difficulty! Use our guide in the section ‘ How to cut skirting board without removing it‘ to help you. Alternatively, hire one of our expert tradespeople to help you. How do you cut skirting board with a hand saw? Unlike traditional wooden skirting boards, Orac skirting boards are made of a lightweight duropolymer meaning that you don’t need screws to fit and attach your skirting boards to the wall. The best application and finish will come from using adhesives. Measure and mark – Just like using the manual method, you’ll need to measure and mark your wood before performing any cuts.Using an adhesive and nail gun, fit the skirting boards in place. Sand away any rough wood before, or when in place. You can then fill the (hopefully) minor gap in the mitre with a decorators caulk or using a fine wood filler before sanding down, priming and painting the skirting boards. How to Cut Internal Corners for Skirting Boards A straight cut is easier than a mitre cut using this method, but should still be done with care. For a straight cut, you'll preferably need a square (tool used to draw perfectly square and 90° degree lines), a pencil and a saw. Cut the skirting board angles using the mitre box. With the board positioned correctly, place the saw in the correct gap using the left or right arrow you previously marked as a guide (right for right and left for left). Top Tip: Don’t forget to use the correct adhesive, depending on whether you are attaching the skirting board to the wall, or another skirting board. Watch Orac’s video on how to fit skirting boards To look good, skirting boards require joints that fit perfectly and seamlessly in and around the corners of your home. For this reason, we always recommend hiring a professional to do the job for you. Not only will it ensure a decent finish, but it saves you the hassle of sawing, shaving and filing the boards yourself. What is the best tool to cut skirting boards?

How to Cut Skirting Board - Step-by-Step | Checkatrade How to Cut Skirting Board - Step-by-Step | Checkatrade

As well as showing you how to fit and install skirting boards, in this article, we will also show you how to cut your skirting to size, measure and cut angles for skirting corners and how to apply skirting adhesive. To fit your skirting boards, you will need the following tools:Top tip: Don’t forget to mark which corner the skirting board is on using an arrow that faces inwards or outwards. Also, consider whether it’s on the left or right. Step two: Secure your mitre box When pressing the skirting board against the wall, you will notice that some of the adhesive may spill out of the top and out of any joints. Don’t be alarmed. This is normal. Clean away any overspill with a spatula or damp cloth to ensure a clean finish. You may need to repeat this again after a few hours. To create a mitre joint, you need two pieces of wood cut at 45° angles which are then butted together for form the perfect 90° turn. In general, mitre cuts are used to form the joints where pieces of skirting board meet in the corner of a room. These aren’t the strongest timber joints, so they aren’t perfect for bearing load or pulling forces. This is the easiest option if you have access to a multi-cutter. You'll definitely achieve a straight and clean finish with the least amount of effort.