The stones you use don’t have to be dry upon purchase, but we do recommend washing and letting them dry before use, as some new stones can arrive with a silty deposit. Bags are emptied into a Gorilla Tub before being carried into the working area – the bags could be emptied directly where needed, but this installer prefers to work with the Gorilla Tubs.

This product can also be used as a resin bonded sytem where the resin is applied to the substrate and the gravel is scattered across the surface. With resin bonded paving, soak-aways and channel drains must be installed to prevent run-off which could lead to flooding.

com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US. The homeowners are reluctant to do away with the look and feel of gravel by having the area paved solidly with, say, flags or setts, only to have them go green with algae and need regular washing down to swill away dirt, while the cost and inconvenience of a conventional resin bound surfacing seems barely justifiable. Thanks to its high resin content, you can also rest assured that GravelHold will outperform any water-based loose gravel binders and is supplied with a 2 year guarantee. For a more controlled application and better yield, a pressurised sprayer can be used instead of a watering can. To enable personalised advertising (like interest-based ads), we may share your data with our marketing and advertising partners using cookies and other technologies.

For those projects expecting a little more pedestrian traffic, allow for 2-3 litres per square metre. The EasiHold is sprayed directly onto the placed aggregate, once again taking care to avoid spraying onto walls or adjacent surfaces.

But bear in mind that how your finished surface will be used depends on what type of sub-base your area will require. Resin Bound Training Course A comprehensive one-day program to equip participants with the knowledge and practical skills required to install resin bound surfaces effectively.

The system will achieve its initial strength after 24 hours of drying and will arrive at full strength after 7 days. Stones between 4mm and 10mm in diameter work the best, but even stones up to 20mm can work well if angular and clean. Resin Bound Tools Trowels, floats, sledges, spazzles and lutes can all be found in our range of tools for resin bound gravel installations.SUDwell™ bound gravel has a multitude of uses from paths, and patios, through driveways and parking structures. But no more loose gravel, no more stones being walked-in to the kitchen, no errant stones being perilously flicked up by the mower…. Stir the resin and hardener individually and then combine the resin and hardener and mix for 3-5 minutes using an electric drill and mixing paddle, or wide bladed tool. The area is now cleared - all that grotty gravel and lousy landscape fabric has been shifted and the new decorative aggregate can be placed. Mix the resin and hardener individually and mix for 3-5 minutes using an electric drill and mixing paddle, or wide bladed tool, working around the sides and base so all liquid is incorporated to ensure thorough and complete mixing.

The loose gravel gets scuffed and scattered, kicked up by the dogs rushing in and out, walked into the house via the soles of wellies and boots, lost into the adjacent lawns as the mower hovers over, and it has become, not to put too fine a point on it, a damned nuisance.Each two part polyurethane resin is perfect for mixing with decorative kiln-dried aggregates to create a continuous, attractive and SuDs compliant stone carpet surface. Resin For Bonding Gravel Driveway can be used with aggregates in a range of colours and materials allowing you to choose a bound gravel driveway to compliment your home. Note how a sheet of heavy-duty polythene has been laid down over the preparation area just in case of any spills or splashes.