We supply stainless steel bars in grades 304 and 316. Grade 304 is a general purpose grade which is excellent for welding. Grade 316 has outstanding corrosive resistance. It is therefore commonly used outdoors, or in particularly harsh settings like marine environments. The wire is used for a range of applications including the fabrication of pipe and plate. The weld metal provides good resistance to pitting corrosion and crevice corrosion by non-oxidising acids. Intended for applications where service temperatures do not exceed 400°C. PRODUCT FEATURES A molybdenum bearing, stainless steel filler rod with low carbon content. Therefore it is corrosion resistant for welding molybdenum bearing austenitic stainless steels. A solid wire for depositing a low C -19% Cr -12% Ni -2.8% Mo weld metal for the welding of 316 and 316L stainless steels. CHEMICAL ANALYSIS Our Stainless Steel Round Bar range can be cut size to suit your requirements. They are available in non standard sizes in both Metric and Imperial and in a wide variety of grades, including: 303, 304, 316, 321, 410, 420 and 431. Mild Steel TIG filler rods– A15 are the most commonly used of the mild steel filler rods available. A15 is a copper-coated triple de-oxidised mild steel rod. Used with the DC TIG process it enables sound, porosity free welds to be made on mild and low-alloy steels

All of our stainless steel is sourced from accredited mills and is fully certified. The chemical and mechanical certification is available on request. We have an extensive collection of stainless steel rods for sale with diameters ranging from 3mm to 152mm. The standard length for the stainless steel rods we supply is approximately three metres but we can also cut a rod to length for you up to five metres. including ER316LSi) filler metal should be used with 316L and 316 base metals. CF-8M and CF-3M are the cast equivalents of 316 and 316L, respectively. Stainless Steel TIG filler rods– Most commonly used is 316L – A stainless steel filler rod suitable for 316 and 316L stainless steels. 316L is corrosion resistant and is suitable for food grade and marine grade applications. 308 is a cheaper stainless filler material, suitable for the widely used 304 sheet material, a most cost effective stainless steel.For rods that are more than two inches in diameter we offer grade 303. This is the most machinable austenitic grade of stainless steel because it has a slightly higher proportion of sulphur. It is commonly used for aircrafts, nuts, screws and bolts.

Generally in 3.000 to 3.200 Metre lengths although in certain sizes longer lengths are available. Commonly in Grades T303, T304, T316, T321, T410, T420 & Grade T431. 1/8″ Diameter Stainless Steel Round Bar Generally in 3.000 to 3.200 Metre lengths although in certain sizes longer lengths are available. Commonly in Grades T303, T304, T316, T321, T410, T420 & Grade T431. 3mm Diameter Stainless Steel Round Bar including ER308LSi) is predominately used on austenitic stainless steels, such as types 301, 302, 304, 305 and cast alloys CF-8 and CF-3. For high temperature applications such as in the electrical power industry, the high carbon 308H electrode provides better creep resistance than does 308L.Aluminium TIG filler rods– Used in AC TIG welding setting. The most versatile of the aluminium rods are 4043A. 4043A is an aluminium alloy with 5% silicon, offering excellent flow characteristics and penetration. Next popular is the Aluminium Magnesium Alloy 5356. A harder material, 5356 can be used instead of 4043 when the part being welded is going to be subsequently anodised. A stainless steel rod, or stainless steel bar, is commonly used in construction because of its durability and resistance to rusting. SIFSTEEL 312 TIG welding wire can be considered as a problem solver for all kinds of steel grades incl. stainless and difficult-to-weld steels.