Cromar Cromapol Acrylic Waterproofing Roof Coating is a high performance, acrylic based roof coating which contains fibres. Cromapol acrylic roof coating is a one coat application and can be applied without a primer. It has the ability to be applied in damp conditions on most surfaces. Cromapol roof coating is designed to provide a high level of water resistance on flat and pitched roofs. It is ideal to apply a layer of Cromapol to a flat roof after summer because the heat from the sun can cause minor deformities to occur in the roof. This can result in water pooling on the roof, which can lead to a wide array of damp issues and structural problems that are costly to fix. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour The Cromapol Acrylic Waterproofing Roof Coating by Cromar is a high performance acrylic based roof coating which contains fibres. A Cromapol acrylic roof coating can be applied without a primer. It has the ability to be applied in damp conditions on most surfaces.

Amazingly, Cromapol will waterproof instantly, even in damp or wet conditions, will not wash off while curing and will withstand ponding and usually covers in only one coat which normally needs no primer. All moss and lichen must be removed using Cromar’s Moss & Mould remover, ensuring all corners and gutters are clean and free from plant growth. Cromar Cromapol Acrylic Waterproofing Roof Coating is a high performance, acrylic based roof coating. The Cromapol Opaque option is fibre free. Cromapol acrylic roof coating is a one coat application and can be applied without a primer. It has the ability to be applied in damp conditions on most surfaces. Gap or expansion joints greater than 3mm must be covered using Glass-Fibre scrim and Cromapol. This must be carried out prior to full coating.We recommend storing it under covers and between temperatures of 5°C and 20°C to maintain its quality.

It can be used on wet or dry surfaces, meaning you can apply it in damp weather or when rain is forecast. A layer of Cromapol acrylic roof coating paint typically takes 72 hours to cure and dry, but it will still protect against water ingress, even when it hasn’t cured. Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface. No, Cromapol acrylic roof coating does not typically require a separate primer. It is designed to be a standalone product that can adhere directly to roofing materials. However, in some cases, priming might be recommended for improved adhesion on porous or damaged surfaces. Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent, and is designed to prevent the incress of water.Cromapol is suitable forgeneral waterproofing and sealing of roofs, pitched surfaces & for sealing flashings Cromapol roof coating is a liquid resin with a high level of fibres. It is the concentration of fibres that bridges the gaps in roofing, preventing water from getting through and causing issues. The excellent adhesion of Cromapol means only one coat is required to achieve an impermeable waterproof layer. Even if it’s wet outside, Cromapol won’t wash off. One Layer Application Clean all debris to ensure a dust free surface, all moss and lichen must be removed using a Fungicidal Wash, ensuring all corners and gutters are clean and free from plant growth. Unlike other acrylic roof coatings, only one layer of Cromapol is required. This means you can apply the product yourself in minimal time. You can use a paint brush to apply Cromapol, but due to the fibres and nature of the resin, you will have to dispose of the paintbrush after you’ve finished. You also do not need to prime the area beforehand. Variety of Uses Under optimal storage conditions in sealed original containers, our product maintains its quality for a period of 12 months.