It is designed to be connected to the VITE Cap so that you can tighten the cap without having to hold the washer with one hand. The Raimondi VITE Xpress tool can be used on both floors and walls, and works with individual caps as well as caps with anti-scratch washers. The Raimondi VITE Tile Levelling System is supplied as individual components, which are available in multiple different pack sizes. Insert the Raimondi Tile Levelling System wedge in the clip (base) slot, using the Anti-chip/scratch plate if required, paying attention not to pass the breakpoint. For tiles that are 18mm to 30mm thick, such as external porcelain pavers, use the Mustang Plus Tile Levelling Clips with the standard Mustang wedges and levelling tool.

Tile Levelling System - Tiling Supplies Direct Mustang Tile Levelling System - Tiling Supplies Direct

The Mustang Tile Levelling System clips are available in 3 thicknesses to control the width of the grout joint: 1mm, 2mm and 3mm. Once the correct amount of pressure has been applied to the wedge, the base clip will be firmly locked in place and ensures that the adjacent tiles will have no visible edges or lippage. Use the consumption table guide linked at the bottom of the page to determine how many clip/wedges you will need for your project. The Mustang Tile Levelling System application tool is a handy time saving accessory that allows the user to quickly apply the correct amount of pressure when combining a Mustang wedge to it’s relevant base clip. The Genesis GLS Easy Wedge is an innovative tile levelling system allowing accelerated installation.The Raimondi VITE Tile Levelling System is a tool-less tile levelling system comprising of a threaded cap and clip that is tightened by hand. The use of the Anti-scratch plate does not alter the performance of the Raimondi Tile Levelling clips in terms of maximum and minimum thickness of the tiles to be levelled, but it does increase the joint size by 0. Tilers Tools Landscapers VITE Levelling Kit is ideal for professional landscapers installing thicker porcelain and natural stone from 14mm up to 26mm thick. If you are using this system over a large area with a lot of clips, the Raimondi LEVMATIC Battery Powered Levelling Pliers makes pushing the wedge into the clip effortless and reduces fatigue.

Raimondi Tile Levelling System - Tiling Supplies Direct

Once the adhesive is set, the protruding part of the support has to be separated from the base, which is embedded beneath the tile edge. Made from solid durable red PVC, they can be re-used over and over again and are perfectly designed to work with both Mustang and Mustang +Plus base clips.The use of the pliers is recommended and is facilitates accurate levelling and speeding up the insertion of the wedge in the clips. The Raimondi Tile Levelling System uses special traction-adjustable pliers that are available in two different versions, one for floor applications and one for wall applications. To facilitate this operation, the use of the traction-adjustable Raimondi Tile Levelling System pliers is recommended. Once the adhesive is set, remove the cap by beating it with a Raimondi White Rubber Mallet to avoid marking the tiles (or with the foot).

Spacers and wedges | Topps Tiles Spacers and wedges | Topps Tiles

Your e-mail address is only used to send you our newsletter and information about the activities of Tilers Tools. Remove: Allows for an innovative removal of the clip once set by setting the tightening torque on the driver to its maximum setting, tightening the cap until the clip breaks. Using this washer does not affect the levelling clips performance in terms of maximum/minimum thickness of the tiles to be levelled. The Mustang Tile Levelling System is also available as a starter kit in a handy tub that contains 100 x Mustang base clips (1mm, 2mm or 3mm), 100 x Mustang wedges and 1 x Mustang precision application tool.The Anti-scratch plate can be reused over and over again, both as anti-chipping and anti-scratch element and multi-size removable-spacer. The anti-scratch plate performs two functions at the same time: Anti-chipping since it prevents the stems of the Raimondi Tile Levelling System clip from touching the edge of the tile during wedge insertion thanks to a dedicated L-shaped tab; And prevents scratching by ensuring the wedge does not touch the tile but slides on the platform instead. Applying pressure with the tool is a quick and easy process but also provides a good indication as to where the resistance point is before any clip breakages occur. Furthermore, the Anti-scratch plate can also be used as a removable and reusable multi-size-spacer, by having 3 sides of the plate in different thicknesses, 1. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.