Superior Durability: The galvanized coating enhances the pegs’ durability, protecting them from rust and corrosion, and ensuring long-lasting performance. actually I'm not being entirely facetious on this naming thing: if he meant what you think he meant, it's hardly a novel technique requiring a special name) Crafted with precision and built to withstand the toughest of conditions, these Dutch Pins Masons Pegs are designed to provide steadfast stability for a range of masonry applications. The galvanized coating ensures exceptional corrosion resistance, extending the lifespan of the pegs and maintaining their structural integrity even in challenging environments. I will use the ball-endmill technique, followed by StanP's suggestions for a tapered pin. it seems like the best way to get at least a reasonably round hole, followed by a good press fit. Wall tie failure can be very costly if not detected and dealt with as early as possible. In its most severe cases, wall tie failure can result in the complete collapse of an outer leaf wall. The more damaged or corroded wall ties become, the more difficult it is to replace them.

The modern game is most likely to be have had its roots in the ancient game of ninepins or Kegelspiel. Ninepins was popular with the Dutch, Germans and the Swiss. Introducing Dutch Pins Masons Pegs Galvanized: the ultimate solution for securely fastening your masonry projects. Available exclusively at PFT Wales, these high-quality galvanized pegs are essential tools for masons and builders seeking reliable and durable construction support. eg certain Americans talk of which way a road sign is 'pointing' when to me what they're talking about is which way it is 'facing' (given that the sign may also have an arrow on it pointing left or right, or even up.) You don't specify, but I infer you are drilling a hole with an axis parallel to the axis of the cast iron plug. In the Anglo world these are called 'Scotch Keys' and are quite often used to hold the rim (say bronze or alloy steel) onto a wheel centre (say CI or steel, eg for a wormwheel or a gear wheel). note to Peterve: I wouldn't read too much into the "Dutch" - Pennsylvania Dutch, to take one example, are in fact of German extraction (Deutsch)I am wary of using a striaght-flute reamer because the hole is different materials on each side, and I figure any reamer is going to tend to cut the aluminum more than the cast iron (an oval hole is no good)>> From around 1200 AD the use of a flat playing surface began to emerge. Often a plank, around 12-18 inches wide and 20 to 30 yards in length, was used as the lane with the pins set up as three rows of three pins. As it was impossible for all the pins to be bowled down within one throw, pins were respotted after each ball by the pin-boy.

Trustworthy Support: Rely on these Dutch Pins Masons Pegs to provide the stability and support you need for a wide range of construction projects, ensuring peace of mind and efficient workflow.It is believed that Protestant Reformer Martin Luther (early 16 thcentury) settled on a nine-pin game as his preferred version, following a period of trial and error. The International Bowling Museum and Hall of Fame formerly located in St. Louis owned a model depicting Luther bowling on a single lane with nine pins. An associated leaflet stated that Luther was an avid bowler.

Strong and Sturdy: These masons pegs are built to withstand the rigors of heavy-duty construction work, providing a reliable anchor for your masonry projects. Yes, I agree that if he had been writing in UK or New England English that would seem to be a safe bet, and any of my English teachers would have taken your side. Over the next 300 years various alterations were made to improve the game. From canopies over the bowling and spectator areas – spectators traditionally sat behind the pins, to a gutter down one side of the lane, which angled down towards the bowler, so balls could be returned by the pin-boy. The formation of the pins also moved to a diamond shaped configuration.One way I've got around this is to machine the keyway on the shaft (plug, in your case) by lying it down in a vertical mill and using a ball nose cutter (as Racer Al seems to suggest) Game variations throughout the middle ages also include reference to a king pin. For some versions this was a larger ball whilst in others this was a larger, sometimes more ornate pin. However, the days of playing ninepins in England were numbered by 1366 when King Edward III banned it. Seemingly it was so popular with his armies that it was distracting them from their military duties as they were choosing a game of ninepins over archery practice. I think however he may mean 'across' in the sense that the drill is crossing two different materials as it sweeps.