The Western Digital PC SN530 NVMe SSD, supporting PCIe Gen3 x4, is designed for a multitude of applications that require both high performance and low power. Equipped with a fully integrated solution which includes an in-house controller, 96-layer 3D NAND, firmware, and extensive testing, Western Digital provides longevity of supply in a robust and reliable design.

Alternative to Western Digital 1TB CH SN530 M.2 - Ten Forums Alternative to Western Digital 1TB CH SN530 M.2 - Ten Forums

Test Conditions: Performance is Need Measured by CrystalDiskMark 5.2.1 using 1000MB LBA range ASUS G752VSK . Windows 10 Pro 64-bit using Microsoft StorNVMe driver, Primary drive. Performance may vary based on host device. 1 MB = 1,000,000 bytes. IOPS = input/output operations per second.

The modder hasn't yet tested PCIe Gen 4 SSDs with 4 lanes, so it's possible that the right CFexpress card could automatically disable two of the lanes. Using PCIe Gen 3x4, the IX SN530 delivers incredible speeds to meet the growing performance requirements of Industrial IoT systems. With sequential read speeds of up to 2,400 MB/s and write speeds of up to 1,950 MB/s, the IX SN530 matches its toughness with speed. TBW (terabytes written) values calculated using JEDEC client workload (JESD219) and vary by product capacity. As used for storage capacity, one gigabyte (GB) = one billion bytes and one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment. With future-ready, scalable NVMe architecture, the Western Digital PC SN530 NVMe SSD offers both manufacturers and end-users the solution to innovate and expand their computing effectiveness. This NVMe SSD enables greater design flexibility for ultra-thin notebook or tablet designs that require a cost effective, reliable storage device with a small form factor and capacity points up to 1TB 1.

SN530 NVMe SSD | Western Digital IX SN530 NVMe SSD | Western Digital

The IX SN530 is a Western Digital fully vertically integrated storage solution. From the 96 Layer 3D NAND, in house controller and firmware, to internal validation and qualification. Enabling the high quality and reliability expected of an Industrial grade SSD. With two form factors, M.2 2280 and M.2 2230, the IX SN530 provides flexibility for the design and mechanical constraints system designers may encounter when considering high capacity storage solutions. MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing. MTTF is based on a sample population and is estimated by statistical measurements and acceleration algorithms. MTTF does not predict an individual drive’s reliability and does not constitute a warranty. (Telecordia SR-332, GB, 40°C). Despite this modder's success, this mod would be very difficult to duplicate with other hardware. The PCIe Gen 4 requirements are completely proprietary to Microsoft and its Xbox Series consoles since the official CFexpress standard only supports PCIe Gen 3 speeds or slower. Also, finding a PCIe Gen 4 drive with just two lanes is nearly impossible. CFe to NVMe adapters are not sold online by many people, mainly in photography accessories stores. Of course, there is also a DIY CFe card solution, but you need to polish the m.2 solid state. If you need it, please search in the orange software. Polishing solid-state hard drives will have certain risks, so be cautious if you have poor hands-on ability!Today’s technology must be able to operate within a wide range of temperatures. The latest in industrial technologies it is designed for the elements ranging from summer heatwaves to winter snowstorms and the data gathered by these systems is expected to survive these harsh conditions. The new IX SN530 NVMe SSD wide operating temperature support (-40˚C to +85˚C) allows designers to worry less about the need to keep the storage device cool or warm so that they can design their latest innovations with the utmost confidence and flexibility. Read speeds up to 2,400 MB/s and low power consumption leverages both the PCIe Gen3 x4 interface, as well as sophisticated NVMe power management

Conversion Adapter Lets You Install Short M.2 SSDs Into Xbox Conversion Adapter Lets You Install Short M.2 SSDs Into Xbox

The Western Digital PC SN530 NVMe SSD is designed for a multitude of applications that require both high performance and low power. The device is not only capable of more than three times the read speed over SATA SSDs, but further optimizes the low power consumption level to a mere 5mW. The user bought the CFE adapter card from a DSLR/Camera shop since these adapter cards are not available widely in the tech market. A Western Digital CH SN530 SSD that features an NVMe M.2 (2230) protocol was used and equipped to the rear end of the adapter card. You can see that while the adapter card may not have enough space for a full-length SSD since the mounting holes end up short but you could still equip them & use them without issues.

This Custom CFE Adapter Card For Microsoft Xbox Series X & Series S Will Let You Use Any SSD On Your Console

A PCIe 4.0 X2 NVMe hard drive. I chose the CH SN530 m.2 2230 which was disassembled by XSX (note that it is not PC SN530, PC SN530 is PCIe3.0 ). This hard drive is an original hard drive built into XSX. If XSS needs to be disassembled and expanded, this hard drive can be said to be a must. Measured using MobileMark™ 2014 on ASUS B944UA with i5-7200U, 8GB RAM. Windows 10 Pro 64-bit 19H1 using MicroSoft driver, Primary drive.