Jez is known for breaking exclusive news and analysis as relates to the Microsoft ecosystem while being powered by caffeine. If your controller has never been taken apart, the sticker inside the battery compartment will be intact.

This article explains how to take apart an Xbox One controller if it needs repairs, keeping in mind potential snags and specialized tools you'll need. Use a T-8 safety Torx bit, and be careful to properly seat it and apply even pressure to avoid stripping the screw. Many of these are non-curing, so if you carefully scrape what you have into a little mound, you may be able to reuse it. If your Xbox One controller isn't working right, and you've already updated the firmware and gone through some basic troubleshooting like checking the batteries, the next step is usually going to be taking the controller apart.Wireless connectivity via Xbox Wireless Adapter (Windows 10/11 PC) or Bluetooth LE (Windows 10/11 PC, iOS, Android), or USB-C (Wired). While this controller works on legacy consoles, the new Share button may not work; this will just remain unused when unsupported. You can find out more about our use, change your default settings, and withdraw your consent at any time with effect for the future by visiting Cookies Settings, which can also be found in the footer of the site. Once inside, the modular design allows for easy fan, optical drive, PSU, and wireless board replacements. Other identifying elements include the A/B/X/Y face buttons, shoulder bumpers, and Start and Back buttons.

The third revision of the Xbox Wireless Controller was released in November 2020, bundled with Xbox Series X and Series S. For the prying tool, you can use anything that's thin enough to fit inside the gap between the controller housing and the end covers. Xbox One controllers are generally accepted as one of the best video game controllers around, but they still break down from time to time. Reddit and its partners use cookies and similar technologies to provide you with a better experience.Use these to cleanly remove the battery compartment sticker that hides a security screw without using your fingers or puncturing a hole in the sticker. You’re right in that this stuff does seem to be something different compared to thermal paste and thermal pads, and it’s not easily available. With the disc drive out, the remaining innards are contained within this massive assembly, which is mostly just heat management strapped to some boards. Sticking buttons: Use canned air and other methods to remove gunk and other buildup after removing the circuit board assembly from the controller housing. And subscribe to our newsletter so you’ll be the first to know when the newest consumer tech hits the teardown table.

You’ll also want to use a T6 Torx or TR6 Torx Security screwdriver to remove the standard Torx screws if you are replacing or modding other internal components like the motherboard or LED. You now have access to the rumble motors, triggers, and some additional screws that you can leave alone unless you need to replace specific components on the circuit board.This is it, folks—the new generation of consoles arrives this week, starting with the Xbox Series X. A TR8 Torx Security screwdriver can remove the security fasteners needed to open Xbox 360 controllers and standard Xbox One and Xbox Series X|S controllers. Malfunctioning d-pad: Carefully pry up the tabs on the spring assembly so it pushes down with more force.