Operating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1 degree C for every 1,000 ft from 5,000 ft to 10,000 ft Aruba X372 54VDC 1050W 110-240VAC Power Supply (JL087A) is a 1050 watt power supply for applicable PoE switches. It offers up to 740 watts of PoE power and is keyed so that it will not fit into the power supply slots of non-PoE Aruba switches. RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 – 24 support MACSec RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1-48 support MACSec

If the switch is configured with redundant power supplies, the switch will not suffer any loss of traffic or performance if a power supply fails, except for possible PoEreallocation on PoE Class 4 and PoE Class 6 swithces.

Performance and power for the campus

ports SmartRate 100M/1G/2.5G/5G BaseT Class 8 PoE ports supporting up to 90W per port (on port 1-12), and Class 6 POE ports supporting up to 60W per port (on ports 13-48) HPE Aruba 2930M 24 Smart Rate POE+ 1-Slot, 2930M 24G POE+ 1-Slot, 2930M 40G 8 HPE Smart Rate PoE Class 6 1-slot Switch, 2930M 40G 8 HPE Smart Rate PoE+ 1-slot Switch, 2930M 48G POE+ 1-Slot, 3810M 24G PoE+ 1-slot Switch, 3810M 40G 8 HPE Smart Rate PoE+ 1-slot Switch, 3810M 48G PoE+ 1-slot Switch, 3810M 48G PoE+ 4SFP+ 1050W, 3810M 48G PoE+ 4SFP+ 680W Aruba 6300M 1050W 36-72VDC PSU (JL758A) is a 1050 watt DC power supply used for 6300M PoE switches. This is keyed so that it will not fit into the power supply slots of non-PoE Aruba switches. Aruba X372 54VDC 1600W 110-240VAC Power Supply (JL670A): A 1600 watt (high-line only) power supply for applicable PoE switches. It offers up to 1440 watts of PoE power, and is keyed so that it will not fit into the power supply slots of non-PoE Aruba switches. RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 – 40 support MACSec

Voltage dips and interruptions: IEC 61000-4-11; >95% reductions, 0.5 period; 30% reduction, 25 periodsHigh-performance up to 1760 Gbps switching capacity, up to 1310 Mpps of throughput, and redundant, hot swappable power supplies and fans. Speed and power for users and IoT The HPE Aruba X372 JL086A Redundant Power Supply has a power capacity of 680Watt. It works at an input voltage range of 100Volt to 240Volt AC and provides an output voltage of 54Volt DC. This Hot-Plug Power Supply comes with 3 Years Warranty. Specifications RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 – 24 support MACSec SFP+ fixed 1000/10000 SFP+ ports; Duplex: 100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 – 16 support MACSec