Sika Aquaseal Waterproof Tanking Membrane, Blue, 5 Litre

£3.99
FREE Shipping

Sika Aquaseal Waterproof Tanking Membrane, Blue, 5 Litre

Sika Aquaseal Waterproof Tanking Membrane, Blue, 5 Litre

RRP: £7.98
Price: £3.99
£3.99 FREE Shipping

In stock

We accept the following payment methods

Description

Then we applied the second coat of the membrane making sure we finished off with horizontal strokes with the 3 inch brush which is supplied with the kit. Use in showers, wet rooms, wet zones in bathrooms and other tiled areas subject to water exposure such as balconies and partially covered external areas. Aquaseal Waterproof Tanking Primer (1L) - For use before applying Tanking Membrane and Tanking Tape. Aquaseal Waterproof Tanking Membrane 5LTR Forms a permanently flexible watertight membrane, applied by brush, two coats.

Then we applied the Aquaseal primer with a 3 inch brush to the floor and the walls. This could be done with a bigger brush or even a fleece roller. Aquaseal Waterproof Tanking Tape (10MTR) - Self adhesive joint and corner sealing tape. Easy to apply with pre-cut release liner. Also, at this point it is worth noting that Everbuild’s Aquaseal Tanking Systems, both standard (4.5 square metres) and large (7.5 square metres) come with a paint brush and a roller. Our only criticism of the entire kit is that 2 brushes may well have been better. We always recommend the use of Tanking Tape on corners and board joints prior to applying the membrane to ensure the integrity of the watertight seal.For bonding and sealing joints, look no further than our tile grouts for protection against discolouration, water and mould. The flexible drain mat was then applied around the floor drain. This mat can also be applied around any inlet and outlet pipes in the walls and floors and allows for any expansion and contraction in the hot and cold water as it flows through the pipes of down the drains. Aquaseal Waterproof Tanking Membrane (5LTR) - Forms a permanently flexible watertight membrane, applied by brush, two coats. Based on tried and tested wet room tanking principles used in areas such as Scandinavia and Germany where wet rooms have been common for many years.

Apply by brush in two coats which should be applied in different directions at right angles to each other to ensure full surface coverage is achieved with no weak spots. litre of liquid tanking primer (Styrene Acrylic based polymer) with a drying time of 1 – 2 hours depending on temperature of bathroom or wet room. For very porous surfaces, such as plasterboard, two coats will be requiredApply the first coat horizontally and allow to dry for 6 -12 hours then apply the second coat vertically. Waterproof tanking is the most important stage in any wet room installation. It’s essential to use high-quality, durable waterproofing systems to create a space that’s built to withstand constant wet conditions – and our wet room tanking materials are designed to do just that. Tanking membrane suitable for 4.5 square metres of wall and floor. This is a liquid waterproofing compound that is applied in two coats. The second coat can be applied 6 – 12 hours after the first then after 24 hours the tiling can commence

Aquaseal Waterproof Tanking Tape 10MTR Self adhesive joint corner sealing tape. Easy to apply with pre-cut release liner. Pay careful attention to edges and corners to ensure that the coverage in these areas is always consistent as these are the potential weak spots where leakage could occur. We’re the nation’s leading trade supplier with over 25 years’ experience. Whether you’re looking for internal or external tile adhesive, or even wood or tile on tile solutions, we’ll have a product that does the job.Our tile adhesives collection will also assist in wet room construction. There’s ready-mixed tile adhesive as well as a practical adhesive and grout mixture. A ready to use primer, applied by brush to all porous and semi porous surfaces in the areas that are to The Tanking Drain Mat is also recommended around the drain outlet and to reinforce floors and floor joints which is the area most susceptible to leaks. Our ready-mixed tile adhesives are a convenient choice, with general-purpose, water-resistant and grout options available. For a strongbonding porcelain tile adhesive, our powder range is up to the challenge. This range also features a white wall and floor tile adhesive for neat and tidy results.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop