Different colors can also be used to indicate the cable's length. Some cables may come in different lengths, and the color of the cable can indicate its length. For example, a blue cable may indicate a length of 5 meters, while a red cable may indicate a length of 10 meters. This can make it easier for technicians and installers to identify the correct cable for the job.

White Ethernet Cables | CPC UK White Ethernet Cables | CPC UK

Ethernet cables are physical cables that are used to connect devices in a wired local area network (LAN). They are commonly used to establish a wired connection between computers, routers, switches, and other networked devices. Ethernet cables are essential for transmitting data, such as internet traffic, between devices within a network. It’s available in sizes from as little as 3ft, all the way up to 25ft. Even better, the high performance of this cabling takes it above the majority of Cat 6 ethernet cables out there. Also, it’s not always true in this scenario that the most expensive is the best. Just like with HDMI cables, there are companies out there professing that their brands are premium. But, ultimately, what they are selling is the same as the cheaper stuff. There are two different pinout standards used worldwide, and depending on your location, you will determine which one you should use. An easy way to remember the two different RJ45 connector pinouts is T568A is used in America and Asia, and T568B is used in Britain(UK) and Europe. The different pinouts will still work if you mix them up.

Crossover Ethernet cables are used to connect two devices of the same type, for example, if you want to connect two routers or two PCs. Most modern IT equipment can auto-detect that a crossover needs to be made and change the signal. This is called MDI-X. A crossover LAN cable will connect the receive at one end to the transmit at the other. Care must be taken to clearly identify a crossover cable so it is not used by mistake, which may cause network outages. These cables are sometimes made with a cable that has a red outer sheath. Cross-over Ethernet Cable Pinout RJ45 Pinout for a Crossover LAN Cable Remember that Pin 1 is on the left hand side of the RJ45 connector with the clip at the rear. Crossover Ethernet Cable Incidentally, I once had an engineer tell me the performance could be worse too, but I have never experienced that and I have used a lot of flat cables around my own house. Cable Length:Ethernet cables have a maximum recommended length, which depends on the specific standard and cable quality. For example, Cat 5e cables should not exceed 100 meters (about 328 feet) in length for optimal performance. If you just need a cable to upgrade your network or connect somewhere new in your house, then you’re good to go. This will do the job perfectly, without all the fuss and expense of pro-level cabling solutions.

Ethernet Cables Come in Different Colors? Why Do Ethernet Cables Come in Different Colors?

Cat 6a (Category 6a):Cat 6a cables, also known as Cat 6 Augmented, offer even higher data transfer speeds, up to 10 Gbps over longer distances than Cat 6 cables. Those looking to really future proof their network might want to look at the newer Cat 8 standard, which supports speeds of up to 40Gbits/sec at distances of up to 30m using the same RJ45 connectors as Cat 6a. Predictably, though, it’s expensive and mostly used in data centres to hook up the most demanding high-performance network kit. Which category do you need? If you aren’t sure about the differing standards when it comes to your Cat 5 and your Cat 7 worry not. What if you don’t even like cats? It’s okay to be a dog person too.StarTech doesn’t make the cheapest cables, but they are rigorously tested and have a reputation for reliability. This Cat6 cable comes in blue, white or grey in lengths that cover everything from short patch cables to longer 15m runs. It uses 100% stranded copper conductors with 50-micron gold-plated connectors, and the cables are tested with the industry-standard Fluke tests to ensure they deliver reliable, professional-grade performance. Cat 7 (Category 7):Cat 7 cables are designed for high-speed networking and offer data transfer speeds of up to 10 Gbps. Straight through LAN cables are the most common, and the pinout is the same if they are Cat5e, Cat6, or Cat 7. The different types of cables (category or cat) offer increasingly faster transmit and receive speeds. This is achieved by increasing the wire twists, better shielding, drain wire, and increased diameter. Kenable Cat 6 UTP Copper Ethernet Network Cable Reel: The best bulk Ethernet cable for DIY projects