We rate each knife sharpener on how easy it is to set up and use, plus how easy the instructions are to follow. Things we learnt testing knife sharpeners Carrie Honaker, who updated this roundup, is a food writer who has wielded many knives over the years. As a restaurateur and avid home cook, she knows the importance of caring for your knives to maintain steady, sharp edges. Her work has appeared in many publications, including Bon Appetit, Allrecipes, and Wine Enthusiast. One of the most common questions we get asked here at Knife Sharp is ‘ Do we sharpen Global Knives?’ The answer is most certainly yes! In fact, we see more Global Knives pass through our knife sharpening workshop than any other brand of knife.

Keeping it at that angle, pull the knife down the honing steel while pulling the handle towards you. We love Global Knives as the quality of the steel (CROMOVA 18) is fantastic. The steel has the great property of being hard but malleable and sharpens up really well to create a razor-sharp edge. As we work on Global Knives so often, we have sharpened and repaired pretty much every model and type of Global Knife including the Classic, Ni, UKON, and Sai ranges as well as the limited-edition models they produce. We can safely say our Global knife sharpening service is the best and most comprehensive in the UK. Jason Horn, a commerce writer for The Spruce Eats, updated this roundup to include data from our extensive tests of 22 sharpeners—10 electric and 12 manual—by both freelance testers and in our Lab in Birmingham, Alabama. A honing steel, sometimes also called a honing rod or a sharpening steel, doesn't exactly sharpen your knife. Instead, it realigns the cutting edge to smooth out microscopic bumps and jagged edges. A honing steel is a long rod, often included in knife sets, along which you run both sides of the blade before you start slicing and dicing. It helps maintain the integrity of the blade, straightening out some of the microscopically uneven spots on the edge without actually removing any metal. Used regularly—as in every few times you use the knife—it can help stave off dullness, but you'll still need to sharpen your knife on occasion.

Sorry, we don't have stock that matches those filters

It doesn’t matter which knives you buy—they'll all need to be sharpened periodically. Besides making it easier to cut and chop, keeping knives sharp is also safer for your fingers: Dull knives can drag or skip while cutting, which can increase your chance of injury. How often you need to use a knife sharpener depends on exactly how often you use the knife, what you cut, and what surface you cut on, but professionals typically recommend sharpening once or twice a year. Pull the knife blade along the sharpening steel towards you, with enough gentle force that you can hear a grinding noise.

Place the heel of the blade (where it connects to the handle) against the steel, with the knifepoint angled slightly upwards. To discover the best knife sharpeners on the market, we collected an array of dull knives—plus several boxes of Band-Aids—and tested their performance slicing through paper, carrots, and tomatoes (and a baguette, for serrated blades), both before and after sharpening. We also measured each knife's sharpness scientifically, using an Edge-on-Up tool to record the exact amount of force needed to cut through a standard material.How well the sharpened knives performed: We examined their ability to slice through paper, tomatoes, and carrots both before and after sharpening. For models that claim to accommodate serrated knives, we tested their slicing performance using a baguette. We then sharpen the knife with its dedicated knife sharpener according to the manufacturers' instructions. Brod & Taylor Professional Knife Sharpener: It looks like a piece of contemporary sculpture, and its maker claims that its spring-loaded design is foolproof to use, but we had to manually hold the unit open to insert the knife and weren't able to get very good sharpening results at all. Add a hefty price tag, and you've got a sharpener we wouldn't recommend. This process is essentially the same with both a manual and electric sharpener, but the motorized abrasives in an electric model will do more of the work for you. The most important thing is to try to use the same amount of pressure and the same angle with each pull through the slot—different models of sharpener make this easier or harder, depending on their design. Unless the directions specify otherwise, it should take three to five pulls through the coarse slot, and then just a couple through each finer slot, to sharpen the knife. If it's not as sharp as you like, try a few more pulls through the finest grit slot, and if that doesn't work, try the whole process over again. Manual sharpeners are generally cheaper and simpler to use, but they require more effort, so they may not be ideal for people with limited hand grip or arm strength. They're easier for a beginner to use correctly compared to an electric knife sharpener.

If your knife sharpener has a fine or honing setting, run it through that once or twice after the coarse setting. Do this in the same way, but with less force. To keep your knife sharp, use the fine setting once after every couple of hours' use. We hand sharpen all Global Knives using our specially designed water-cooled diamond whetstones which means we can get the knives sharper then new. When new even Global Knives are machine sharpened, and our hand sharpening produces a much sharper edge. Hold the knife at about a 22-degree angle to the stone. 90 degrees is your knife placed on the stone as if you were going to cut through it. Tilt the knife halfway between that and the whetstone and you'll be at 45 degrees. Then tilt it halfway between that and the stone, and you'll be at around the correct angle you need. Rebecca Treon, who also updated this piece, is a food writer, experienced home cook, and mother of two. Her work has been featured in BBC Travel, Huffington Post, Hemispheres, and Thrillist.The electric Chef'sChoice 130 Professional Sharpening Station is simple to use and works well on many different sizes of blades, while the manual Longzon 4-in-1 offers similar quality with a low price tag. For those on a budget, the electric Presto EverSharp is excellent, too. How We Tested Design: We highlighted sharpeners that featured multiple stages for maximum efficiency or different slots for different blade sizes. Knife sharpeners can be bulky, so we also focused on compact sizes that you could store easily in your kitchen. All that’s left to do is dig out your blunt and damaged Global Knives and get them sent off to us to get them sharper than new!

Repeat this action three to six times. You can go for three if your blade is just a bit dull, and more if it's blunter. A whetstone is much harder to use. To get a good result, you need skill and practice, plus considerable patience. It really depends on how much you use them and how much abuse they take, but knives generally need sharpening once or twice a year. If a knife feels dull or has trouble cutting, sharpen it. Just note that every time you sharpen a knife, it removes a little bit of metal. After many repetitions, there won't be enough left to sharpen, and it'll be time to replace your knife. Handheld manual knife sharpeners are designed to keep your blade fresh, and you should use them to top up the blade after every few hours of use. An electric knife sharpener or whetstone would be your best bet for a fully dulled knife.

We did not expect a knife sharpener at this low of a price to work as well as it does, but the Longzon 4-in-1 really delivers. As the name suggests, the manual sharpener has four slots—three successively finer ones for standard knives and an extra-wide one especially for sharpening scissors and shears. Some manual sharpeners take a little practice to use correctly, but the Longzon's design and included directions make things simple. There's even a QR code link to video instructions if you're more of a visual learner. According to Blake Hartley, Executive Chef at Lapeer Seafood Market, a sharpening steel removes material from your knife by moving the edge alongside the steel to restore the V-shape of a blunt edge. A honing steel is not used to sharpen but to restore the bent edge so that it's straight again. How sharp the knives turned out: We analyzed sharpness using a scientific tool called the Edge-on-Up, which measures the force needed to cut a standard reference material. When the sharpener has more than one setting, the coarse setting is the sharpener and the fine one is normally similar to a honing steel. Each knife sharpener will have its own specific directions, and you should always follow those, but in general, you insert the blade into the slot and pull it through with even pressure several times. It's important to make sure the full blade passes over the abrasive, all the way from heel to tip. Then, you repeat the process on the other side of the blade (though some sharpeners work on both sides at once), first using the coarsest slot and then each of the finer ones.