Yuasa YBX3075 12V 60Ah 550A SMF Battery

£9.9
FREE Shipping

Yuasa YBX3075 12V 60Ah 550A SMF Battery

Yuasa YBX3075 12V 60Ah 550A SMF Battery

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

B. Stop charging when the battery is gassing freely and the battery-voltage shows no increase over a period of at least 2 hours. For example, if the battery has a voltage of 12.16V, charge it for 10 hours at the recommended charge rate.

C. Charge the battery at the recommended charge rate. If you cannot set the recommended rate, extend or reduce the charging time on a pro rata basis. For example, if the recommendation is to charge the battery at 4.0A for 6 hours (24Ah = 4.0 x 6), charge the battery for 12 hours if you can only set the charger at 2.0A (24Ah = 2.0 x 12). Modern cars often require more powerful batteries to power air conditioning stop/start systems sat navs in-car DVD players and phones. The following options are available in the Yuasa range. Yuasa YBX5075 Silver Series Battery

B. These chargers should be able to charge over discharged (below 11.00V) batteries. Note that some have a special setting for all-calcium batteries. Constant Current Chargers Switch on the charger. See below for the correct charging conditions depending on your type of charger. Terminal Layout: Negative (-) on left, Positive (+) on right ; with the terminals on the edge of the battery closest to you

Considerable investment in European manufacturing facilities, the establishment of a European network of 6 wholly owned companies, and the constant search by Yuasa to provide even more reliable power from smaller batteries, has resulted in the company's current position and proud claim to be No.1 in Europe!Yuasa 12v 60Ah 550A Car Battery YBX3075 (HB075 / HCB075) Yuasa 12v 60Ah 550A Car Battery YBX3075 (HB075 / HCB075) If you are using a constant-current charger or a boost-charger, remove the vent-plugs or manifolds before charging. There is no need to remove the vent-plugs or manifolds if you are using a constant-potential or a ‘smart’ charger. These maintain a fixed, constant, pre-set current throughout the charging period irrespective of the battery on-charge voltage. Do not charge AGM batteries on a constant current charger. C. Note. The majority of constant potential chargers are incapable of charging a severely over discharged (below 11.00V) battery in a realistic period of time. A minimum of 24 hours is normal. It might be impossible to charge an over discharged battery. Modified Constant Potential Chargers These provide a very high initial current, and are used mainly to put some charge into a flat battery when it is needed urgently by the customer. The current falls as the battery state-of-charge increases, and the battery temperature is monitored to make sure it does not overheat.

These maintain a fixed, constant, pre-set voltage throughout the charging period. The current cannot be set and will fall as the battery state-of-charge increases.

Stop charging if the battery begins to gas freely (some gassing is normal during the last stages of charging) or if the battery temperature rises above 50°C.

B. Never boost-charge any battery that is below 11.00 Volts as it will be too sulphated to accept a charge; scrap the battery or charge normally. C. Only use a boost-charger that limits the charging voltage to a maximum of 14.2 Volts and that has a temperature monitor. A. Boost charging is not recommended except in exceptional circumstances e.g. a stranded customer, as this will reduce battery life, especially if a battery is boost-charged more than once. Yuasa are one of the world's largest manufacturers and suppliers of valve regulated lead-acid batteries with global manufacturing plants and an extensive marketing and distribution network throughout the UK and Europe.

Duracell 075 / DA60T Advanced Car Battery

A. Ideally, charge each battery on a separate charger unit. If this is not possible, charge batteries in series. We do not recommend charging batteries in parallel because it is not possible to control the amount of current passing through each battery. If batteries in different states-of-charge are being charged in series, each battery should be removed as soon as it is charged. (If you wait until the last battery is charged, some of the batteries will be overcharged). It is good practice to wait for about 20 minutes for the gases to clear before removing the leads from the battery as some chargers remain ‘live’ and can cause a spark. We receive data from battery manufacturers and this may be subject to change and / or manufacturing tolerances.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop