Briwax 400g Wax Polish - Dark Oak
- Brand: Unbranded
Description
Buff the entire furniture piece with a lint-free soft cloth to take off any excess but to also work into the paint.
you can do as many wax layers as you’d like playing with different colours of waxes just as long as you add the clear wax first. the longer the wax stays on, the harder the wax gets. If I’m selling a piece of furniture, I make sure to not move it/transport it for a good week so the wax has time to really set and harden Beeswax Paste with Pure Turpentine is a traditional paste wax that nourishes wood and gives an authentic finish to furniture.... Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.Sanding Sealer (007749006) applied by brush or rubber and allow to dry (approximately 30 minutes at 20°C). When dry, apply the wax polish using 0000 grade wire wool to achieve the smoothest finish and allow to dry for a few minutes. When dry, buff with a clean, dry lint-free cloth. Unsealed wood may be waxed without sealing, but this method will give a much lower shine. waxing replaces having to use a polyurethane coat and is typically used over chalk-type paints or Fusion Mineral Paint (FMP is an acrylic but goes on like a chalk type paint). work in sections at a time when waxing. Make sure to buff that section first before moving on to another section (example: wax the top of the desk first then buff before moving on to the legs).
Farrow & Ball Dulux Homebase Crown Heritage Crafted by Crown Ronseal Craig & Rose Sandtex Elle Decoration Rust-Oleum Annie Sloan Zinsser Cuprinol Laura Ashley Today’s contributor is Patricia from The Wood Spa and she is a sharing a tutorial on how to use dark wax to age furniture. All posts contributed by Patricia for Grillo Designs can be found HERE . Ventilate well while drying and avoid covering the surface. After 2-3 weeks, the floor surface is fully cured. Also, the clear wax allows time to ‘play around’ with the effect you want and it allows you to take more off or add more on smoothly and easily.You can use a cheap brush or a wax brush to apply the wax. Make sure you remove loose bristles before using it. I hope this guide on how to use dark wax on furniture has helped you to feel confident to try it yourself! When using 3111 White as the first coat on flooring, a second coat of 3040 White from Polyx®-Oil Tints is recommended to avoid yellowing. These waxes may be applied to bare timber or used over a base stain. The following are suitable for use under this range of waxes: Light Fast Stains, Non Fade Ground Stains, Earth Stains and Waterbased Stains. The stain must be dry before application of the wax. (See individual stain Data Sheets for drying times).
- Fruugo ID: 258392218-563234582
- EAN: 764486781913
-
Sold by: Fruugo