Clearwater CH0006 Algaecide Algae Remover for Swimming Pool and Spa Hot Tub Water Treatment, Highly Effective Formula, 1 Litre

£9.9
FREE Shipping

Clearwater CH0006 Algaecide Algae Remover for Swimming Pool and Spa Hot Tub Water Treatment, Highly Effective Formula, 1 Litre

Clearwater CH0006 Algaecide Algae Remover for Swimming Pool and Spa Hot Tub Water Treatment, Highly Effective Formula, 1 Litre

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Clearwater Multifunction Tablets are an effective and hassle-free way of maintaining clear and healthy spa water. They contain a combination of chemicals that act in a number of ways. These slow-release tablets contain chlorine, algaecide and water clarifier. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule. Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water.

Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris. After testing the PH with your dip test strips you can use the following chemicals to increase or decrease the PH. The 5 Inch Chemical Floater slowly releases Clearwater Mini Multifunctional Tablets or Chlorine Tablets, making it the perfect accessory for busy spa users who want a hassle-free way of maintaining clear and healthy spa water. The dispenser has an adjustable dial which controls the release of the 20g tablets, ensuring that the sanitizer level of your spa water is consistently and efficiently maintained. Compatible with all spa models. Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds. Adjust your pool pH and keep a close eye on chlorination levels. Remember: safe chlorine levels range between 1 and 3 parts per million. If the concentration is above 6 ppm, the pool is unsafe.

Storing Chemicals

Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it. Algaecide is a swimming pool chemical to kill or prevent algae from growing in your pool. Its job is to interrupt important processes inside the algae, stopping photosynthesis or provoking an explosion of the algal cell walls. It is best to use an algaecide in combination with a chlorine sanitizer to keep the pool water clean. The ideal alkalinity range is 100 to 150 parts per million (ppm). And you can use baking soda to increase the alkalinity in your pool. Every attempt should be made to avoid mixing spilled material with other chemicals or debris when cleaning up. Do not attempt to reseal any contaminated drums. Do not transport wet or damp material. Algaecide can kill algae, but it is best used as a preventative measure. Its main advantage is that it does not change the pH of the water, but at the same time it prevents algae from growing and developing in your pool. What’s more, the algaecide works in tandem with a chlorine sanitizer to keep pH levels balanced.

For low TA levels below 80ppm you will need to use Total Alkalinity Increaser. The amount of TA + you need to add to your hot tub depends on the volume of water and how low your readings are. As a guide - a hot tub of 1,000 litres requires 18g to raise Total Alkalinity levels by 10ppm (parts per million). Drain pool to minimum mark and re-fill with fresh water to maximum mark, this will help to dilute the excess chemical. If you are going away we would suggest emptying the hot tub and cleaning it so the water is not left to go stagnant. Do not re-fill until you return from your trip. Do not eat, drink or smoke when using this product. Have a First Aid Kit available for any accidents For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly).Clearwater Multifunctional Tablets have been designed for the complete disinfection of your pool and Lay-Z-Spa when used with a Chemical Floater. WIth 4-in-1 uses, these tablets sanitise, stabilise, reduces and prevents algae build-up, and clears cloudy water. An easy way to maintain your pool's chemical hygiene, you only have to load up the chemical floater, which then floats on the surface to maintain clean and clear water. Each tub contains 20g tablets which offer lasting protection for your pool or spa water. Please be aware that these Multifunctional tablets should never be directly added to the pool without a clean applicator such as a Floating Dispenser. Fill the dispenser with the correct amount of tablets depending on your dispenser and pool size. This will always vary and please note the dispenser should always be removed from the pool while people are using the it. You can find a list of the high quality algaecides for pools in our another article (different types of algae included). What is an algaecide and how does it work?



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop