Aquacomputer High Flow 2 53292 Flow Sensor G1/4 Aqua Water Cooling

£9.9
FREE Shipping

Aquacomputer High Flow 2 53292 Flow Sensor G1/4 Aqua Water Cooling

Aquacomputer High Flow 2 53292 Flow Sensor G1/4 Aqua Water Cooling

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

When you activate this product you will receive the current version of the aquasuite software including an upgrade service for at least eighteen (18) months. After the expiration of the upgrade service you may use and reinstall the latest version available during the upgrade period without a time limit.

It is not always easy to visualize what to do by merely reading instructions. So my goal here is to use many screen shots, and walk you through how I set up my two Aquaeros and the Aquasuite software on this particular build. I also use the Start Boost feature, this just turns the fans on max speed for the time specified which is set for 5 seconds here, before they drop down to the controlled speed. A temperature sensor directly connected to the stainless steel housing of the pump ensures a very accurate coolant temperature sensing. For the second Curve Controller I’m using my Software Sensor of the SSD temperature as the Data Source, notice how in this screen shot it shows 50°? That shows that my HWiNFO program was off when I took that screen shot. I named it SSD Fan Curve, and the Output is for Fan Channel 6 which only controls the 40mm fans in the SSD hot swap bay.I am going to skip over the Controller tab here to start with because you have to set up all the fans properly before we can set up any Controllers. I have power and ground wired from the power supply to the Splitty9 to power the fans, and then ran the PWM and RPM wires to the appropriate Aquaero Fan Channel for control. In this first screen shot you can see all eight fan channels along the top of the right pane. There will only be four of these with a single Aquaero. If you do end up adding another Aquaero or two as a slave unit you will have to add the addition channels in the Controllers tab. This Curve Controller right here alone makes the investment into the Aquaero very much worth it! What makes this type of set up so awesome is that the fans will only slowly ramp up and down with your coolant temperature.

Power everything down again; you can disconnect the USB cable as it is unusable. Connect the Aquabus high port to a Hubby7 or the Aquabus high port on the Aquaero XT. Then you can connect your wiring for the extra fan channels to the Aquaero LT. You can actually add a third Aquaero for up to 12 channels of control if you need more channels. The high resolution OLED display combined with mechanical buttons underneath and a touch slider on the bottom side allow can be used to configure and adjust the pump without using the PC. As can be expected from an Aqua Computer product, the pump also features an USB interface for convenient configuration and monitoring using the aquasuite software. Additionally, current data such as temperatures, processor usage etc. can be transmitted from the PC to the pump via USB, allowing them to be used for pump control, fan output or RGBpx illumination.In the right red box you can see I added Ambient Top to the end of the label for the ambient sensor located on the top of one of the top radiators. Also there is a second ambient sensor located in front of the left front radiator. Besides being a fully autonomous USB fan controller, the QUADRO can also be used as an aquabus extension to an aquaero 5 or aquaero 6. In this configuration, the four fan channels of the QUADRO can be controlled by the aquaero, temperature sensor inputs and flow sensor input are transmitted to the aquaero. A maximum of two QUADRO controllers can be connected to an aquaero simultaneously. If I could get the Farbwerk settings to save, I would use Porfile 2 with all the same settings as the first profile except with the lighting off. Profile 3 is the same as Profile 1 except I shortened the Radiator Fan Curve to 3° max instead of 6° which just makes the fans ramp up faster.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop