Then position the skirting, hold it in place with yer foot whilst you gently tap it along its length with a soft mallet to nicely squish the adhesive in place - chust pressing it firmly into place is fine too. A squeeze of adhesive coming out along the top is good. Ok, now keeping it in place with yer foot, hammer the PPs in just enough so's they grab in the masonry (ie - in the plaster layer). Just tap them in enough to hold - do NOT over-hit them or they are likely to bend and then move the skirting board or break the plaster. If you have masonry walls then the best option is usually going to be to use a mixture of adhesive such as Gripfill (we supply standard and solvent free Gripfill) and masonry screws or nails. Double-Head Skirting Thread Seamless Nail ------ Our Double Headed Skirting Nails is specifically designed for interior decoration, providing worry-free attachment to skirting boards without the risk of them coming off or the nail holes rusting. This seamless installation enhances the beauty of your interior, giving it a more polished and appealing look. The double-headed design ensures easy and discreet attachment, leaving no visible nail heads or marks. Anyways, once you are happy you know how you want it to sit, hammer in these panel pins in the centre of the skirting, and fit them where they'll do the job you want - eg holding the skirting in to follow a line, keeping the skirting running straight, etc. You only want the minimum number of PPs to do this, perhaps 4 or 5 per length. You want them pretty much all the way through the skirting - their little points chust appearing.

When fixing your skirting board to masonry walls you will need to make sure that you use masonry nails or screws. If using the latter, you should start by drilling pilot holes in to the masonry wall before inserting wall plugs that the screws will be fed in to. For nails, you should simply hammer these in around every 50-60cm. Right, remove the skirting, run a goodly bead of solvent-free along near the top (about 10mm down) and a ditto near the bottom (about 15mm up), and then some wobbly beads in between (depending on how tall your skirting is). High-Quality Nails ------ Our Double screw nails are built to meet your long-term needs. By securely holding the skirting boards in place, they guarantee a durable and reliable installation. This high-quality construction adds to the overall aesthetics of the skirting board, providing a clean and sophisticated finish to any room.Skirting Line Dedicated】This non marking nail for skirting is designed specifically for installing skirting lines, so you no longer need to worry about falling off the skirting lines or rusting the nail holes, which will affect the aesthetics. Versatile Application ------ Our Skirting nail tool have a wide range of uses. They are not only suitable for skirting boards but can also be utilized for hanging photos, engaging in craft projects, or general maintenance. They are a versatile tool that can assist you in various tasks around the house. One exceptional advantage of the Double-Head Skirting Thread Seamless Nail is its ability to create an almost invisible result.

Give Away Special Tools】This nail specific sleeve tool allows you to place the nail into the sleeve and directly tap it into the wall. Strong adhesives such as Gripfill are without a doubt the easiest way to attach your skirting to the wall but they can be troublesome with walls that are not even – which is a common problem even in modern homes.Easy Installation】 There is no need for an electric drill to drill holes. First, put the nail into the sleeve, drive the nail into the wall, fix a nail according to the length of the skirting line of about half a meter, and then fix the skirting line to the nail.

For the uninitiated, choosing the right nails for skirting board can seem a little daunting. The reality is that you may not even need nails at all and with a few minutes of planning you can ensure you have everything you need to install your new skirting boards as soon as they arrive. You should find you'll learn how to judge this - a couple of firm (and straight) taps with the hammer should do.

Top Tip: To ensure you drill holes deep enough measure the depth on the drill bit and mark it with a piece of masking tape. Then you just ensure you drill to that depth each time. Using a nail gun can significantly increase the speed at which you fix your skirting to the wall but it is not strictly necessary as a good old fashioned hammer will do the job just as well. Due to the different display and lighting effects, the actual color of the item may be slightly different from the color displayed on the picture. Skirting Line Dedicated】 You no longer need to worry about falling off the skirting lines or rusting the nail holes, which will affect the aesthetics.