ATOMSTACK A5 Pro Laser Engraver, 40W Laser Engraving Cutting Machine Laser Cutter with Eye Protection Fixed-Focus, 5W-5.5W Output Power, Compressed Spot, Engraving Area 410x400mm

Product Information

In the video at the top of this article, we have compared the performance of the Atomstack A5 Pro to its direct competitor Sculpfun S6 Pro. Newly upgraded compression laser: Newly upgraded ultra-fine compression laser: The laser adopts 4-folded lens group collimation and focuses technology, the optical power is 5-5. Power is varied from 10% to 100% in 10% increments and the speeds are 600, 1200, 1800 and 2400mm/min. The Atomstack A5 Pro is a powerful and versatile laser engraver that brings the power of professional level equipment to your home.

Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. The shim is 2mm thick and after tightening the z axis screws with a hex key, the head stays 2mm above the surface. We warrant that the Products are free from defects in materials and workmanship under normal use and use in accordance with the respective Product user manual, during the Warranty Period (defined below). Vector format is preferred format for these machines because it contains the paths around the shape edges on which the laser head tracks. There is a protective cover on the laser to protect the user's eyes and there is no need to wear additional protective glasses.Laser etching and engraving are among its capabilities, making it a versatile tool for precise cutting and intricate designs on different materials. You and the people around can watch laser engraving without goggles, reducing the cost of your goggles and the inconvenience of wearing them.

Discover the perfect synergy of technology and efficiency – your gateway to limitless possibilities in laser engraving and metal cutting awaits! The Atomstack Laser Engraving Machine is compatible with popular engraving software, including LaserGrbl (Free, compatible with Win XP, Win 7, Win 8, Win 10, Win 11) and LightBurn (Paid-30 Day Free Trial, compatible with Mac OS, Linux, Win XP, Win 7, Win 8, Win 10, Win 11). The upgraded A5 Pro Laser engraver focuses on user protection with a built-in heat dissipation system that cools the laser diode and prevents the defocusing of the laser beam, a laser protective cover, and a security system that can detect the irregular activity of the laser. In the future, ATOMSTACK will keep innovating to meet all needs of laser engraving enthusiasts for machines and related accessories, making it easier for them to turn ideas into reality. We can see that at higher speed there is more wobbling present (mechanical) but the speed shows to have no effect on brightness of the engraved pattern.

For defective, incorrect or not as described item, please send us a clear picture or video of the problem.

The installation process is straightforward and hassle-free, allowing you to begin engraving quickly. I think that you can always wait couple of minutes more for cutting, but you can never make the focus spot smaller. Photos are quite slow to engrave because the laser head must scan line by line like an inkjet printer. Screws and parts come in separate bags, labelled accordingly to the necessary step in the assembly manual.Open Box items are products that have damaged packaging or are otherwise not suitable to be sold as new. To enable personalised advertising (like interest-based ads), we may share your data with our marketing and advertising partners using cookies and other technologies. This warranty is non-transferable and proof of purchase from us or an authorized dealer is required for warranty service.

There is also clear effect of rectangular dot shape in the two squares as vertical lines are much thinner than horizontal ones. In this test, the Atomstack A5 Pro tends to show signs of rectangular beam shape, as the vertical and horizontal scans look much different! Additionally, conducting test runs on scrap or sample materials can help determine the ideal speed and power settings for your specific application.Tried to make the same test on blue acrylic but it did not work as the blue color does not absorb the laser light well enough, probably the material is not dark enough or the blue color reflects the blue laser light and after 50 passes at 600mm/min with full power, the Atomstack A5 Pro also just melted the board a little. Sturdy and easy-to-install structure design: The all-aluminum alloy anodized structure design makes the machine more durable and improves the engraving precision. This is a bit of a review, but also shows projects I was able to do, and things I learned as a newbie to laser engraving. Some people prefer the look of a slightly defocused laser for engraves, I reckon follow this process with a focussed one first, and then change it later if you wish.