PEBA Crimping Pliers Connector Set- 18 Styles JST-XH 2.5mm Connectors and Crimp Pins Assortment Kit, JST Crimping Pliers 0.05-0.5mm²/AWG 30-20 for JST(XH/SM/PH/SYP), Dupont Connectors

Product Information

To the extent that your personal data is processed on the grounds of your consent, you have the right to withdraw that consent. PEBA is committed to better pliers design for all, including JST/Dupont connectors kit, Spade receptacles kit, and ferrules connectors kit. If the insulation wings are ever so slightly inside the die and not flush with the edge, you will get a perfect crimp. In my experience, the insulation is too big to go into the connection and the side of the crimp tool keeps it from going in.

I probably need to make a wire ruler and mark exactly how far the wire goes in for each different connector.I was able to crimp 4 connections (in 5 attempts) using your instructions and this crimper (which is a bit cheaper).

This is a crimp tool Digi-Key sells under Adafruit Part Number 350 which can be used to crimp many housing contacts ranging from 20 to 32 AWG wire. Are we supposed to pull the existing pins out of the connectors, and push the newly crimped male pins into the holes?

Ah, looked at the wrong datasheet; but interesting one says to use the same dies and the other says it cannot do it. Art of Connector Crimping” about my article where he pointed out that I am not the first person to come to that conclusion. And, as my gift, I’ll add that I was failing because I was inserting the connector “wings up” into the crimped (the brand you don’t like).