Airflow iCON 30 Extractor Fan 230V 100mm Outlet, White, 27 W

Product Information

Please note: While the Icon 30 uses 4" inch ducting it does require a 6" hole in the wall or ceiling for flush fitting. A quick, core drilled hole enables immediate fixing of iCON 30 which is suitable for recessed or surface mounting in walls or ceilings.

Copyright Plumbworld 2024 Plumbworld, Millennium Court, Enterprise Way, Evesham, Worcestershire, United Kingdom, WR11 1GS.

We are unable to deliver to the Isle of Scilly, Jersey, Guernsey, Northern Ireland, Isle of Man and the rest of Europe.

Icon15 Fan also feature a modual system allowing overrun timers, humidity sensors and pull court to be installed in the fan without having to replace or remove the fan. iCON’s round design means fitting in the wall or ceiling is simple, and with three versions, are suitable to install in any room; large or small. The fan and ducting should be inspected and cleaned on a regular basis to keep fan performance at an optimum level. The iCON 30 is quiet, powerful and designed for recessed or surface mounting in walls or ceilings in larger toilets, bathrooms and utility rooms.

uk/img/CJlbN8haCrDnOF2Xwaj8bKu1gNf0kRep1iWi_LGvc6tbnJAV2stpVEK6zPjWRnKMXmG1xkq40RYVycMpDlo=nu-rw-w0-c0xffffffff-e30/. Humidity (HTM) - Monitors the humidity in your bathroom and switches the fan on and off as required to control it. iCON 30S is ideal for toilets, wet zones (1 and higher) in en-suites, shower rooms, utility rooms and bathrooms. Airflow iCON 30 4 Inch (100mm) mixed flow, centrifugal axial extractor fan features a brushless DC motor, reducing energy consumption compared with standard AC motors.

It has a narrow contour skirt that aids in surface mounting and is a mixed centrifugal/mixed fan that has been designed and developed with efficiency at the forefront. Timer (TM) - An overrun timer which allows the fan to run on for a while after the room light is switched off. The iris shutter design makes switching on and off almost silent and helps reduce external noise ingress. Whilst the original (ICON15) fan looks great, at 76m3/hr, it just isn't that powerful and was vastly out performed by much cheaper extractor fans. Also incorporates an overrun timer which allows the fan to run on for a while after the room light is switched off.The shutter design makes switching on and off extremely silent therefore, reducing external noise ingress.

The central “iris” shutter opens when switched on ensuring the silent running of the fan to help prevent noise infiltration and back draughts. The Airflow 72591601 iCON 30 is a quiet, powerful and stylish mixed flow fan, which is suitable for recess or surface mounting in larger toilets, bathrooms and utility rooms. Low Voltage fans are for use in areas where a 240volt fan would not be suitable and a higher IP rateing is required. The Airflow iCON 30 Extractor Fan is a powerful device with an extract rate of 32 litres per second, making it the best choice for domestic spaces such as kitchens, larger bathrooms, lounges, and utility rooms.

A simple flick of the switch and excess humidity from a shower or long bath can be extracted until you turn the light back off. You can simply change the module for a pull cord, a timer, a timer and humidistat or a timer and motion sensor, ensuring you always have the right extraction for your bathroom. All electrical installation must be carried out by a qualified electrician in accordance with Approved Document Part P of the U. Black mould also has a high chance of growing because of dampness, and this can be particularly dangerous to your health.