Comfort display: Indoor comfort is calculated based on indoor temperature and humidity (5 levels in total). Very vivid from a smile to a sad face. When the temperature is higher than the upper limit of the alarm temperature setting, the activation of the upper limit alarm, symbol " " flashing, Press any button except the button to stop the alarm signal. It is not necessary to reactivate the alarm. It switches itself automatically to the alarm time which has already been set. Press button to confirm your setting, the Year display 2015 starts to flash. Now use “ ” and “ ” buttons to set the correct year. Ideally, the station should be mounted at a height of 4 to 6 feet above the ground. It is preferable to position it at a horizontal distance that is four times greater than the height of the nearest obstruction. Ensure that the gauge is mounted parallel to the ground, avoiding any horizontal surfaces that may cause rainwater splash or snow accumulation in the vicinity. 2. Why is it important to use weather stations at home?

Press and hold down the " " button for 2 seconds, the 12/24 hour mode display starts to flash. Now use "▲" and "▼" buttons to set the correct 12/24 hour mode. If the temperature reading is below ranges , the LL.L will be displayed. If the temperature reading is above ranges , the HH.H will be displayed. The three common remote sensors will take care of your basic needs. You can easily get the measurements of the temperature and humidity levels. And no need to worry about the accuracy as well, the product is well known for that. Press " " to confirm your setting, the Time zones start to flash, Now use " ▲ " and " ▼ " buttons set a correct time zone (PST MST CST and EST).The time zone must be set correctly according to the weather station area, or when the time signal is received, the time will be incorrect

Press button to activate or deactivate the remote temperature alert, When the remote temperature alarm is activated, the temperature alarm icon is displayed in the remote sensor barWhile we can’t really predict the weather in the long run, there is something we can do that can let us know what is likely to happen short term, and that is investing in one of the best weather stations. The Weather Station will now start to make a connection to the Remote remote sensor. This operation takes about 3 minutes and is displayed by a flashing reception RF antenna symbol in the “REMOTE SENSOR” display area on the receiver. The weather station calculates a weather forecast for about the next 12 hours based on the barometric pressure trend. Of course this forecast can't compare to that of professional weather services supported by satellites and high performance computers, but merely provides an approximate indication of current developments. Please take the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.