Weathershield All Weather Protection is formulated with unique Stay Clean technology that protects against dirt and mould growth within the paint film, giving you a long lasting colour and finish Surface Preparation - Ensure the surfaces to be painted are dry, clean from dirt and grease or flaking paint. Areas affected by mould, lichen or algae should be treated with weather shield multi-surface fungicidal. For best results, surfaces that remain powdery or chalky after preparation should be sealed with one coat of the appropriate dulux stabilising primer, this will provide a sound and stable substrate for painting. Any defects should be repaired using the appropriate polycell product. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead Application: Brush, roller, airless spray,conventional spray. STIR THOROUGHLY BEFORE USE. Seal all new or bare surfaces with a thinned coat of Weathershield Smooth Masonry Paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Smooth Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. In normal conditions two coats of Weathershield Smooth Masonry Paint properly applied to the substrate in accordance with the instructions will perform satisfactorily for up to 15 years giving good colour stability (as part of BBA certificate 97/3383). See current colour collateral for choice of colours.

It’s a high-performance paint that protects against heavy rain, bright sun, mould, algae and dirt for up to 15 years