Memory: 113356K/131072K available (5146K kernel code, 616K rwdata, 492K rodata, 9928K init, 203K bss, 17716K reserved, 0K cma-reserved) The Zyxel XGS1250-12 comes with eight Gigabit ports and four 10Gbps ports. Of the latter, three are Base-T ports that work with standard RJ45 cables and support all Base-T speeds grades, including Fast Ethernet (100Mbps), Gigabit (1Gbps), and Multi-Gig (2.5Gbps, 5Gbps, and 10Gbps).

Good hour! Help configure two VLAN 1 / VLAN2 on Zyxel XGS1250-12 I have iMac 10G and Synology 5G - connect in VLAN2. The same two devices are connected on the switch (ibid.) And by 1G - VLAN1! If I drive everything into VLAN 1. - the connection goes strange on all ports from 10G to 1G! I would like to divide there are two vertical grids! Again, since this is my first 10Gbps switch review, there's no comparison chart in this part. All I can say is overall I was happy with its performance.rtl83xx-switch switch@1b000000 lan11 (uninitialized): PHY [mdio-bus:1a] driver [Aquantia AQR113C] (irq=POLL) If you truly want to enjoy Gigabit Internet (or faster broadband), upgrading your local wired network to Multi-Gig is a must -- there's no way out of it. And in that context, the Zyxel XGS1250-12 Multi-Gigabit Switch is right up to your alley. For two reasons.

rtl83xx-switch switch@1b000000 lan4 (uninitialized): PHY [mdio-bus:04] driver [REALTEK RTL8218D] (irq=POLL) rtl83xx-switch switch@1b000000 lan2 (uninitialized): PHY [mdio-bus:02] driver [REALTEK RTL8218D] (irq=POLL) Keep in mind that some of the features might create conflicts with your router, so unless you know what you're doing, it's a good idea to use the Zyxel XGS1250-12 the way it's pre-programmed and skip the web interface at all. In other words, use it as an unmanaged switch. Zyxel XGS1250-12: Excellent performanceSince no motherboard comes with a 10Gbps port, I upgraded each machine with a 10Gbps Base-T adapter card. I used two TP-Link TX401 cads, one ASUS XG-C100C, and one Gigabyte GC-AQC107, which I've been using for general router testing. rtl83xx-switch switch@1b000000 lan9 (uninitialized): PHY [mdio-bus:18] driver [Aquantia AQR113C] (irq=POLL) I tested it both with CAT5e and CAT6A. In the former case, the sustained speed was slightly slower with slightly more fluctuations than the latter. Here are the switch's sustained real-world speeds: Sure, it's still much more expensive than Gigabit switches of the same amount of ports, which go for as low as one-tenth of the cost. But that's the price you pay to get ahead of the curve right now. Or you can wait another decade or so, and this type of switch will be a dime a dozen.

rtl83xx-switch switch@1b000000 lan7 (uninitialized): PHY [mdio-bus:07] driver [REALTEK RTL8218D] (irq=POLL) rtl83xx-switch switch@1b000000 lan10 (uninitialized): PHY [mdio-bus:19] driver [Aquantia AQR113C] (irq=POLL)By the way, the Zyxel XGS1250-12 is a managed switch. It comes with a web interface where you can manage its features. However, right out of the box, it's pre-programmed to work as an unmanaged. Just plug it in, and it'll work as it's supposed to.

For most home networks, you won't need to use any of these features. However, those who want to customize their network to the max will find them useful, especially the QoS, Virtual LAN, and Link Aggregation.rtl83xx-switch switch@1b000000 lan8 (uninitialized): PHY [mdio-bus:08] driver [REALTEK RTL8218D] (irq=POLL) https://www.zyxel.com/products_services/12-Port-Web-Managed-Multi-Gigabit-Switch-includes-3-Port-10G-and-1-Port-10G-SFP--XGS1250-12/