Air Conditioner Exhaust Hose Tube Adaptor For Portable Air Conditioner Tube Connector (Round)

Product Information

The narrow Trotec window nozzle has been designed so as not to affect the proper operation of mobile air conditioning systems. Compared to stationary air-conditioning units, mobile air-conditioning units of the PAC series are a practical and inexpensive solution for cooling heated rooms quickly and effectively down to comfortable indoor temperatures on hot days. Four integrated retaining collars ensure a secure hold and prevent the window nozzle from loosening when the exhaust air hose moves. For an exhaust air hose with a diameter of 142 mm the adapter will fit without any further auxiliary means. Whether you require a bespoke heater, fuel hose and fittings, technical support or even a single titanium bolt - we have you covered.

For example, if the window cannot be opened completely for reasons of space or must not be left open for safety reasons. Furthermore, the window nozzle is recommended as an ideal supplement to the energy-saving Trotec window sealing AirLock 100 and AirLock 1000. There are many options available including a number of different bulkhead plates and fittings for Air Conditioning, Push-On Hoses, and AN adapters for Water, Fuel, Oil and Power Steering lines. The cooling efficiency of the air conditioner is increased with less warm air entering from the outside through a window that is only tilted, instead of open.It is a simple and effective part for draining the condensate and the special rubber ring is for preventing leakage. is a load spreader to fully sandwich the bulkhead plate o-ring against the bulkhead/firewall which will ensure a fully watertight seal. The smaller cross-section of the adapter does not affect the cooling and exhaust air performance of the air conditioner.

The only challenge may be the required removal of the warm air to the outside, depending on the room situation. Portable air conditioners of the PAC series, in comparison to stationary air conditioning systems, are practical and cost-effective solutions to cool down heated rooms quickly and effectively to pleasant room temperatures when outdoor temperatures are high. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data. This allows installation against thin or flimsy bulkheads that may not otherwise have enough strength to ensure consistent pressure is applied.Rear view of Challenge 5000 BTU air conditioner converted from single hose to dual hose with a tupperware box (slightly closer view). These units are fully sealed with O-rings front and back to ensure a watertight seal, no sealant or gaskets required. Square (C/H series) interface for KY-25/C, KYR-25/C, KY-32/C, KYR-32/C, KY-25/H, KYR-25/H, KY-32/H, KYR-32/H, KYR-32/H, etc. The diameter of the adapter is 142 mm and is suitable for common exhaust air hoses to increase the cooling efficiency of your air conditioner.

The lock plates are designed with a hexagonal cut out that interlocks with the bulkhead plates preventing them from rotating when tightening the nut on the reverse side. The narrow Trotec window nozzle has been designed in such a way that it does not impair the proper operation of mobile air conditioners.Instead, you’ll benefit from increased flexibility when you utilise your air conditioning system in narrow spaces.