BIGBIG WON Wireless Back Button Attachment for Xbox Series X|S Controller, ARMOR-X Pro Mod Pack Playing on Xbox Series X|S/Xbox One/Switch/Win, 6 Axis Gyro Motion Aim|Turbo|Macro Controller Paddles

Product Information

Set TURBO: Hold the TURBO button+the button need TURBO (You need to release TURBO button once to set other buttons); the LED2 will flash twice in orange+the motor shake for 0.2 seconds. After the wireless adapter connects to ARMORX the LED1 of ARMORX will be always on and the indicator of wireless adapter will be always on with red. Plug the wireless adapter into the Switch. We recommend you use ARMORX under TV mode. If you want to use it under handheld mode please prepare an OTG cable. If the device is successfully put into upgrade mode, the indicator light on the device will be off.

The reporting rate is increased from 125Hz to 250Hz during wired connection in XBOX mode and PS4 mode. Press and hold the small button on the side of the USB dongle and insert it into the USB port of the computer Optimized the bug that the motion would vibrate violently after pressing the responsive motion button and then pressing the A buttonProfile switch button: The main part of ARMORX has 5 setting buttons the button with “ “words is Profile switch button Button which controls MACRO. Connect to PS4 console: Plug the adapter into the console’s USB port and the connection will automatically succeed Assignable buttons: ABXY, D-pad, LB/RB/LT/RT, M1-M4, LS/RS, view button, menu button, and Screen Shot button. To make the Armor X enter the upgrade mode, there is a big hexagonal button in the center of Armor X. The connection will failed if not open this setting, because for the Switch the ARMORX is a wired controller.

The APP can not read the MACRO recorded on the controller so for ARMORX player we recommend you record the MACRO on APP. Setting on APP: Edit the configuration on the APP and apply it on ARMORX pro(Only ARMORX pro support APP). The profile set on the APP can be applied to the controller at any time, and override the profile on the controller. One MACRO button can record up to 15 key values(30 frames). The record will end if the key values are full.After the wireless adapter connects to ARMORX the LED1 of ARMORX will be always on and the indicator of wireless adapter will be always on with blue. Follow the attachment step from Basic Tutorial 01: the attachment and disassemble of ARMORX & ARMORX Pro. computer with access to the Internet must be prepared, Windows 10 and above systems, desktop computers, or laptops are all available.

FN(MACRO) Button: The main part of ARMORX has 5 setting buttons the button with “FN” words is FN Button which controls MACRO. Enter Mapping mode: Hold mapping button+M1/M2/M3/M4 to enter the mapping mode and LED2 on the right will breathe in green.After the upgrade is successful, the Armor X and the USB dongle need to be paired again. The pairing method is as follows: And reestablishing the configuration, and using the previous configuration may cause data confusion and abnormal use. Open the PC upgrade tool, and you will see this interface, and the detected device icon has been displayed. Mapping Button: The main part of ARMORX has 5 setting buttons the button with AB words is Mapping Button.