Coal Saver Black

Product Information

only power saver 3 phases with a kvar capacitor and controller Power factor, c/k and more can true save, depends the inductives load. if good for hotels or place use for sample many air conditioner. here can get good result saving.

Power Conditioning is installed at the supply position and is a great energy saver as well as protecting equipment. It involves using capacitors to chop the peaks off the waveform at 230V. (In a 230V supply the peak voltage of the waveforms is 325V, therefore there is 95V of wasted energy on each cycle which is paid for by the customer It requires a large amount of equipment for a 230V 100A supply, would be very costly to install and dumps high values of power down the earth conductor – it is not permitted. Since a resistive load does not carry a PF so there is not any issue regarding filtering of Voltage and Current, So Power = Voltage X Current.

Optional extras:

If as he said, Jumbo power saver is scam. Then how to prove that his words is true ? Jumbo saver is PF correction device with Kvar capacitors and we have lots of saving examples to show customers. How can Mr.Sun that there is saving by other Kvar savers while there is no saving by Jumbo? If he really know about this tech, then he shouldn’t say it like this. So I guess it depends on how many motors you have in your house and when they turn on. I have many different devices, not counting the occasional power tool. Bashing an unhappy customer who has opinions about your business or it’s practices is not something a professional representative of a thriving company would do.

I have 3 wine coolers, 3 refrigerator/freezers, 1 freezer, 1 built-in stove-top, 1 microwave oven, and 1 convection oven; plus several induction burners. Most are commercial. As he said that only Kvar capacitor with PF controller can save. I don’t think that he knows much about the real saving technology. How does plugging one of these “devices” into an outless anywhere in the house affect anything at all plugged into different circuits and different outlets. The “explanations” in the artile and in the desperately positive comments seem to be base on the idea that there is just one line connecting all the devices in the house in serial. In fact, the devices are all connected in parallel and while there may be interactions between the amount of current flowing through different devices connected in parallel, plugging a box with a few capacitors into on outlet does not immediately come to mind as a way to dynamically influence anything going on with all the devices drawing power from all the other outlets – whether on the same circuit of different circuits. Your product is certainly every enticing. However, I have yet to find any information on the Web that gives me reason to invest.The third term is apparent power, referred to as KVA. By use of multi meters we can measure current and voltage and then multiply the readings together we get apparent power in VA. There are basically two kinds of load that exists in every house: one that is resistive like incandescent lamps, heaters etc. and the other that’s capacitive or inductive like ACs, refrigerators, computers, etc.

The Utility Bill Which We pay is never based on Apparent Power (KVA) but it is based on Real Power (KW). The utility bill that we pay is never for the Apparent Power- it’s for the Real Power. To recover these costs Power Company charged a Penalty to industrial customers for their Low power factors and give them benefits if they improve their Power Factor in. Residential customers (homes) are never charged extra for their reactive Power. First Term is kilowatt (kW) and it represents Real power. Real power can perform work. Utility meters on the side of House measure this quantity (Real Power) and Power Company charge for it. If you really want to be headache, just try to do business with him. I do believe that he got lots of bad buying history in China. And you will be 100% unhappy.Thus the above discussions convincingly prove that energy savers can never work and the concept is not practically feasible. Dishwashers typically use less water than handwashing. They can process several meals’ worth of dishes, depending on the number of dish-users, saving on water-heating costs. They also save precious time. By the way, pre-washing dishes is stupid and unnecessary, beyond a light rinsing, if your dishwasher is any good. Wish I had one.