MICROJIG GRR-Ripper DVC-538K2 Match Fit Dovetail Clamps, Yellow/Green

Product Information

The cutter used is the standard 12mm wide 14° profile found on the basic comb-style half-blind dovetail jigs and needs to be routed at 10mm deep to allow them to slide freely, but sit slightly below the surface so they still tighten securely when clamped to another surface. The Big Dovetail Clamp Vixen+Losmandy PLUS is part of Primaluce Lab system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. With the right flange it allows to connect also Losmandy dovetail telescope on Skywatcher HEQ5 and AZ-EQ5 mount The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original mount clamp.

The Maxi Dovetail Clamp Vixen+Losmandy PLUS is part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. The Maxi Dovetail Clamp Vixen+Losmandy PLUS is designed to support heavy loads. Important Notice: Use Micro Jig products to improve your safety when machining, they should complement your machine guards not replace them. All relevant health and safety practices should be used which are applicable to your country of residence. By a simple adaptation of the humble ‘F’ clamp, these Matchfit clamps offer a very adaptable and versatile solution. Making a dovetail slot into any timber, MDF or ply with a standard 14° dovetail cutter allows the clamps to slide into the resulting slot to make all manner of clamping options for jigs, fences and the like. Free slidingThe fixed head of the clamp is twisted and forged into a dovetail profile of 14°, and making a groove into any piece of timber, ply or MDF allows the clamps to slide in. The slot can be made by running the router against a straightedge or with a fence, but either way, it needs to be straight so that the clamps slide freely. In use

Installed (2 dovetail clamps) on any of our PLUS plates to achieve a side-by-side plate (which allows you to install two telescopes in parallel on the same mount). Thanks to the presence of all necessary threaded holes, you can create side-by-side plates either with Vixen or Losmandy connection plate for different mounts. TheAnti-PivotCoil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part. Please be aware that The Widescreen Centre cannot be held responsible for any postal or third-party delays that may occur. We are committed to providing a reliable and efficient delivery service for our valued customers. The includedX-PAD™simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.Build a secure platform for your biggest projects. Extend the table saw fence height and your infeed capacity with MATCHFIT Dovetail Clamps. Installed (2 dovetail clamps) on any of our PLUS plates to achieve a side-by-side plate (which allows you to install two telescopes in parallel on the same mount). Thanks to the presence of all necessary threaded holes, you can create side-by-side plates either ;with Vixen or Losmandy connection plate for different mounts.