Gate Wheel 6-Inch Spring Loaded Gate Caster for Wooden Gate Fence Metal Swing Gate

Product Information

Many people may not know what a caster is, but when they see it, they may simply define it as a wheel. Works on un-even ground that can avoid dirt, concrete or grass. Square shaft can remove any wobble or movement of caster.

The wheel carrier is galvanized to prevent rusting. Rolling gate hard rubber wheels are 6″ in diameter with a total width of 10″ wheel axle length. Trees can be a natural way for effective screening but may take a while to grow to the desired height,' say the experts at Gardenesque.com. How can I stop my neighbours overlooking my garden?Scratch Resistant: this is made of robust hard plastic which will not hamper the grass while rolling on it. Even it would not create any scratch on the asphalt. lbs load Capacity: Load capacity is 700lbs. that means, it is good choice for both normal and heavy duty gates.

Finally, screw it using as it’s appropriate length or using some carriage bolt and make it sure it rolls freely by touching the ground firmly. The load of the gate has to be appropriate or proportionate for the gate wheel. Easy installation with given u bolt: Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe. This gate wheel can support door weight up to 500lbs. it can can lift your gate up to 8-3/4”. – Diameter is 6”. There is 8-3/4″ from the bottom ofthe wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4″. In the midst of your DIY project? See our full range of Timber Products. Why not make sure you have all of your project supplies ready to go with our Hardware Range.

Mounting holes are 10 millimetre diameter which is just perfect for 10 millimetre 3-8 inch or 5 16 inch bolts or screws even though number 12 or 14 sheet metal screws will work your best bet is to use a 5 16 or 3 8 inch bolt with a nut and washer to properly mount your gate caster

This size helper wheel is used on projects where gate frames are from 1-3/8″– 1-7/8″ OD Pipe. Use this support wheel with 1-3/8″– 1-7/8″ outside diameter pipe gate frames. Double wheels make it a unique and it stands out of the crowd. Product dimension is 12 x 6 x 6 inches and it weighs 6.5pounds. Gate Helper Wheel has 6″ wheel, for chain link fence gate is to support large heavy swing gates, to keep from sagging and staying leveled. It supports the gate stay level while opening and closing it.V-Groove Wheels are used to control the flow of a load, i.e., into an oven, between machines, over long distances or where “production line” sequence is required