Joined in 2023 
82 
63 About this deal
The adapter is powered by the USB 3 port on the switch, note that the adapter cable has two USB connectors, only one is required for use with the Switch but I imagine both will be required if plugging into USB2 ports on a PC as they have significantly lower current capability than USB3. A USB 3 port should be fine. Wii Remotes use the Bluetooth interface, make sure your PC supports Bluetooth. Do not pair the Wii Remote to your computer through its native Bluetooth settings. The operating system may interfere with Dolphin's ability to connect with the Wii Remote. In addition, Wii Remote connectivity will only work if one of the Wii Remote slots is set to Real Wii Remote and it's not claimed by another Wii Remote.
While used with a Nintendo Switch console, the GameCube controller is recognised as a standard USB controller. If you don’t actually plan on moving between different platforms, like moving to the Wii or PC, then you might want to tape the switch in place. It’s somewhat easy to accidentally nudge the switch, and then start encountering tech issues. Because you didn’t notice you hit the small mode switch, you generally don’t think to look there. This adapter measures 4.1 x 1.1 x 1.4 inches and weighs about 1.6 ounces, making it reasonably lightweight and portable. Either side of the device contains a deep controller port, which can be used for taking a variety of different controllers into modern games. Once you’ve connected, you can play your Switch with an NES, SNES, or Wii Classic remote without issue. And of course, with a GameCube controller. How many different controllers are supported? Can the adapter take on the SNES, NES, or Wavebird controllers? Is it able to accommodate newer editions of controllers, like rereleased versions of the GameCube controller? Choose any device that is connected to your PC in the Device dropdown, and set the buttons and axes to your liking.
Nintendo GameCube Controller adapter
RVL-CNT-01-TR Wii Remote Pluses may need extra configuration for older versions of Windows, see the Wii Remote Plus (RVL-CNT-01-TR) Connection Guide. Extension Allows you to add an emulated Nunchuk, Guitar, or other Wii Remote peripheral. Select the extension you want to emulate in the dropdown, and press configure to open a window with slots just like the Emulated Wii Remote window. Select buttons and axes as you wish, and press OK to save. If you wish to attach a MotionPlus to the emulated Wii Remote, select "Attach MotionPlus". In addition to the Switch adapter, this kit includes a cable band which can be used to manage the attached USB cabling. It also includes a USB cable and user manual. It does not include two AA batteries, which are necessary for operation. Once you’ve got a good pair of batteries inside, you can expect about 30-hours of gameplay time before you need to swap them out. Hirohiko Niizumi (June 28, 2004). "Limited-edition GameCube bundle hitting Japan". GameSpot. Archived from the original on July 31, 2012 . Retrieved September 9, 2010. In the Wii Controllers config area, you have the option to use real or emulated Wii Remotes, as well as choosing to passthrough a Bluetooth Adapter (see Bluetooth Passthrough) or emulating the Wii's adapter. You can also assign the Wii Remote to connect it as an emulated controller by selecting "Connect Wii Remotes for Emulated Controllers". Select "Real Wii Remote" in the dropdown for a Wii Remote slot to use a real-world Wii Remote connected to your PC via bluetooth for that slot. Dolphin supports up to four Wii Remotes at once, along with any peripherals you have attached to them. Although the Balance Board cannot be emulated, Dolphin allows the use of a real-world Balance Board by selecting "Real Balance Board". Enable Speaker Data controls whether the Wii Remote speaker can produce sound. When using a real Wii Remote, the audio will come out of the Wii Remotes' speakers; with emulated Wii Remotes, it will come out of the system speakers. Some games, like Metroid Prime 3, have lag issues when Enable Speaker Data is enabled on some systems.
PowerA released a Nintendo Switch Pro Controller with the GameCube controller layout but with additional inputs standard on Switch controllers, allowing it to be used in all Switch games. This controller was officially licensed by Nintendo and is available wireless and wired. [48] Legal issues [ edit ]
Latest News
The New Wii U GameCube Controllers Are Super Hot". Kotaku. June 10, 2014 . Retrieved July 26, 2015. Replications [ edit ] PDP's "Wired Fight Pad" series for the Wii and Wii U, which mimics the design and layout of the GameCube controller Cryer, Hirun (November 17, 2020). "Super Mario 3D All-Stars update includes GameCube controller support for Sunshine". GamesRadar+ . Retrieved November 17, 2020. You may want to make sure your computer is recognizing the controller before using it in an emulator. Open the controller settings for your operating system and look for the GameCube controller. It will likely be named by the product name for the adapter you’re using. Once you confirm the adapter is recognized as a controller, you can move on to setting it up in an emulator like Dolphin. 5 – Connect the GameCube Controller to Dolphin
Great Deal 
New Comment