Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

Apply the grout: load grout mixture onto your grout float and generously apply it to the gaps between the tiles. Using diagonal and firm strokes across the tile joints, make sure you press the grout fully into the grooves so it’s filled to the top and evenly distributed. To ensure complete coverage, we’d suggest applying grout to small areas, working your way logically along. Even if it already seems clean after passing over the surface with a rubber float, always clean the surface using a Scotch-Brite® pad and water, to emulsify traces of resin on the surface which could otherwise modify the final surface finish. For a solid all-in-one grout option, the Mapei Ultracolor Plus Grout boasts excellent water-repelling properties that arere suitable for tile joints of 2mm up to 20mm. It’s also polymer modified, anti-efflorescence and rapid setting - not to mention equipped with anti-mould and drop effect technology, helping to prevent moisture intrusion and erosion over time, wherever you use it. AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO , SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD AND TQ. From our carrier you will receive a text message on the day of the delivery with a 2 hour delivery window. If there any changes or delays you will receive an update via text.

After laying any tiles, you’ll need to choose the right tile grout to help you complete the job and seal your tiles from dirt and moisture - and this is where we can help, too. Ideal for grouting exterior façades, balconies, terraces, swimming pools, bathrooms and kitchens. Especially suitable for grouting floors of supermarkets, highway service stations, restaurants, airports and public service grounds.This means, when choosing the best grout for your tiling project, you’ll need to consider the specific needs of the job. For example, interior decoration projects where you’re concerned with aesthetics alone will likely lead you to choose a different option than that of practical outdoor tile installations. If you are installing one of our hard-wearing outdoor tiles, you'll need a grout that’s fully equipped to handle exposure to increased moisture and dirt, as well as extreme temperature fluctuations between the seasons. Expansion and movement joints on walls and floors must never be filled with Mapei Ultracolor Plus. Use a suitable flexible sealant from the MAPEI range. For Mapei, “zero impact on climate change” means that CO 2 emissions measured throughout the life cycle of ULTRACOLOR PLUS using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. Tiles Direct is your one-stop tiling shop, which means we won’t just help you find the perfect tile for your interior design project - we also have a raft of additional tiling accessories, including Mapei tile grout, to ensure you get a professional and long-lasting finish. Grouting materials with an uneven surface where it would be difficult to apply and clean traditional epoxy mortar.

If hardened and Kerapoxy CQ has to be removed from the joints, use an industrial hot air blower. If hardened localized residues of the product remain bonded to the tiles, use Pulicol 2000 for cleaning. From interior walls and floors to swimming pools, pathways, patios and even commercial areas, grout can be the thing that keeps your tiles looking better for longer. With DropEffect technology, and anti-mould properties thanks to state-of-the-art biotech technology, Mapei grout is suitable for tiling most areas of the home and beyond - including those that experience high volumes of foot traffic on a daily basis.For those in search of a touch of glam, we even supply a selection of tile grout glitter additives in gold, silver, grey, pink and more. Perfect for giving tiled areas some added sparkle to bounce light around the room, this glitter can be added to your grout mix before you apply. Mapei Fuga Fresca: to keep your tile grout refreshed and its colour intact, look no further than Mapei’s Fuga Fresca resin-based grout paint suitable for grout on walls or floors. Minimise water absorption and make tile and grout cleaning a breeze, with colour options including white, grey and silver If you don’t have a colour preference, or hadn’t realised there were numerous options to choose from, the Mapei grout colour chart below can help you to visualise the different shades before you buy.

Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Floors are ready for light foot traffic after approx. 3 hours. Surfaces grouted with Mapei Ultracolor Plus may be put into service after 24 hours. Basins and swimming pools may be filled up 48 hours after grouting. Kerapoxy CQ does not guarantee perfect bonding if the edges of the tiles are wet or contaminated with cement, dust, oil, grease, etc. during grouting. Due to insurance and health and safety regulations we are unable to transport goods into a Customer’s property Mapei Ultracolor Plus creates water repellent grout joints that have excellent colour uniformity. All colours are resistant to UV rays and atmospheric agents. Mapei Ultracolor Plus does not contain Portland cement and must not be mixed with gypsum or other hydraulic binders; never add water to the mix once it has started to set.

Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. This is where tile grout comes into play, providing a hard and water-repelling barrier against dirt and moisture. Grouting is a key part of the tile installation process. Aesthetically, it provides a beautifully smooth result and adds the finishing touch to your tiling job. Practically, it means you can enjoy long-lasting tiles that perform as they should, rather than becoming damaged by dirt, debris and water over time. If you choose to skip the tile grouting process, it can impact the integrity of the tile adhesive, causing them to come loose and need replacing. Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface. After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material.