Motast Wireless Earbuds Headphones, Wireless Headphones Waterproof IP7 Bluetooth 5.1 In-Ear Headphones, Bluetooth Headphones with Mic, HiFi Stereo Sports Headsets with Deep Bass for iPhone and Android

Product Information

I had to drain the batteries completely for both devices and recharged from there. After I did that, no further issues with only one ear bud working. Take one earbud (L or R) out from charging case, touch earbud till blue light flashes, there’s a voice prompt “ Power On”, keep touching till blue and red light flash alternately, there’s a voice prompt “Paired”.

When it comes to Bluedio due to different products in the market it could vary just with volume or power buttons.Because the Bluetooth headset signal cannot be transmitted in water, swimming and diving will cause the signal to be disconnected or interrupted. Step 3:Once you’ve enabled pairing mode, open the Bluetooth settings on the device you wish to pair with. Look for your device in the list of available devices and select it to begin the connection. If you hear "Battery Low", please charge the headset. When the LED display number of the charging box reaches "10", please charge the charging box. Be careful not to exhaust the power in the headphones and charging case, because that may shorten the life of the built-in lithium battery. Turn on the computer settings---devices-Bluetooth and other devices---turn on Bluetooth---add Bluetooth or other devices---search for Bluetooth devices---Power Q20 Pro-pairing / connection ---play music.

First, select the Bluetooth menu from the settings menu on your phone. You should confirm that Bluetooth is turned on under the Bluetooth menu. You can now connect your Galaxy Buds Plus to another device using Bluetooth. How do you get both earbuds to connect at the same time? Take out two headphones from the charging compartment, press and hold the multifunction button for 4 seconds. Resyncing your Bluetooth connection is generally a really straightforward process. First, you’ll want to ensure that the Bluetooth device is turned on and is in pairing mode. Then, on the device you’re trying to connect to, go to the settings and find the Bluetooth option.

How do I resync Bluetooth?

Step 1: Open the Connection Settings on your device. This can usually be found in the Settings app.

You should see an LED of solid blue on both the left and right earphone. Then, on your device, search and select Soundcore Q20. If you are prompted to enter a code, enter “0000”. Once the pairing is successful, the LED will turn off and you will be able to hear the sound from the Soundcore Q20. Why are my noise earbuds connecting separately? First, make sure your earbuds are turned off. If they are on, hold down the power button for 8-10 seconds to turn them off. Turn on your mobile phone Bluetooth, search Bluetooth name “ AIR TWS” and connect it, there’s a voice prompt “ Your headset is connected”. If you want to reset your earbuds to the factory settings, there are a few simple steps you can take. Press mfb (multi-function button) continuously for 2 seconds to turn on, then turn on until the blue light can be seen.a9ec9501-330aca8c-f95e69d9-6deaadb4 Sketch map of the product Waterproof Wireless Sports Headphone ... 3.Turn on the settings of the phone/tablet --- Bluetooth --- turn on Bluetooth --- search ---Power Q20 Pro --- pairing / connection--- play music. The way to pair with computer/Laptop Turn on the com... Note: As I have mentioned under some sections some companies have variations for different products while resetting. Mostly the variation is between power and volume button. Note that some devices may require different steps before pairing mode can be enabled. If you’re having trouble, consult the user manual for your device or reach out to the manufacturer for help. How do I fix the Bluetooth pairing problem?

If the charging compartment lights up green, the charging compartment is charging the headset. 2.When the headset is fully charged, the red light on the headset will go out. I have no idea how "I figured" it out bc I tried what everyone suggested and there was no rhyme or reason other than I put them in their case closed it and stepped away from it for a few hours. I thought I'll try one last time before I get a hammer and mutilate them. I did the below recommended from another frustrated buyer. First, make sure that your earbuds are turned off. If they're not, press and hold the power button until they turn off. Once they're off, press and hold the power button for about 10 seconds. This will put your earbuds into "pairing mode."press L and R earbuds for about 5 seconds to turn off them, in off status, long press L and R earbuds for about 20 seconds, the earbuds will start to restore factory setting The red and blue lights of the other headset flash alternately, that means they enter the pairing state, and are requesting pairing with the mobile phone. Turn off your earbuds manually(Tap the touch control panel of the earbuds for 5- 6 seconds there will be a voice prompt “power off” and the two earbuds will turn off at the same time ) and select "Forget this device" on your device's Bluetooth.