About this deal
PCG-61A12L PCG-61A13L PCG-81114L PCG-81115L PCG-394L PCG-7112M PCG-7113M PCG-7131 PCG-7142L PCG-7153L PCG-7154L PCG-7184L PCG-7185L Sony Vaio PCGA-A Series: All Models, Sony Vaio VGP-A Series:VGP-AC19V2 VGP-AC19V10 VGP-AC19V11 VGP-AC19V12 VGP-AC19V13 VGP-AC19V19 VGP-AC19V20 VGP-AC19V21
There are physical limits to the size, mainly determined by the size of the filter capacitors in the front-end power supply. The capacitors have to have enough microfarads to supply current between AC cycles. There also has to be a transformer and those can be made smaller, to a point, but there are limits there too. Therefore, you need to ensure that the charger you get is 19.5V. The issue then is, does your specific laptop use the 3.34amps or the 4.62? If you aren’t sure and cost is the same, just go for the higher amperage (therefore wattage) one. As long as the volts are correct, you wont damage the device. How do AC adapters work, and why are they so large? The adapter output voltage needs to closely match the monitor requirement. (V-monitor -1v) The reason I say reasonably sure without damaging the monitor is that the internal regulators that operate off the 12vdc, normally will now get hotter because of the higher input voltage. This could eventually cause a failure of the internal regulator if it gets much hotter than the design can handle. But this should be OK if the monitor is not used in a room that is excessively hot like 40–60°C. My laptop is rated "19.5V - 3.34A / 4.62A", should I buy a 65W or a 90W AC adapter?VGP-AC19V76 VGP-AC19V28 VGP-AC19V42 VGP-AC19V59 VGP-AC19V60 VGP-AC19V34 VGP-AC19V38 VGP-AC19V44 VGP-AC19V47 VGP-AC19V49 First the power requirement of the monitor must be known. This information is on the product safety label usually on the rear of the device. What is needed is the voltage and current or voltage and power requirement. PCG-91311L PCG-4121Gl PCG-61A14L PCG-61411L PCG-71911L PCG-71912L PCG-3G2 PCG-5N4L PCG-5S1L PCG-5S2L This Adapter 19.5v 4.7a 90w Adapter suitable for 19.5v 3.9a, 19.5v 3.2a, 19.5v 3.3a, 19.5v 2.9a and many more make sure 19.5v should be match and less than 4.7a is best suitable adapter with 6.4mm*4.4mm pin size. Adapter has 13.5vdc output. Monitor requires 12vdc. 13.5vdc > 12vdc OK. 13.5vdc < 12vdc + 2vdc = 14vdc OK.