VIPMOON Wireless Bluetooth Controller,SP105E Magic Controller Bluetooth 4.0 2048 Pixels iOS/Android APP for DC5V-24V WS2811/WS2812B/WS2801/SK6812/APA102/6803 IC LED Strip Pixel Module Panel Light

Product Information

This SPI signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller. The SP801E LED Controller with 4 output ports, each port supports 1024PCS ICs, so the totally supported number of ICs up to 4096PCS, not only supports the main types of ICs on the market but also supports multiple Art-Net software, supports regular rectangle layout setting and importing DXF files. built-in multiple types of effect layers, text layer, music effect layer, etc. the effect layers support a variety of custom parameters: direction, width, color, length, shape, etc. with the real-time preview function, you will know how it looks like before run on the LED Lights. so it can work with LED Strips, LED Matrix, LED Panels, etc. File “/usr/src/homeassistant/homeassistant/components/light/ init.py”, line 779, in state_attributes Compatible With The Types Of ICs: WS2811, WS2812B, WS2813, WS2801, SK6812, SK6812-RGBW, SM16703, TM1804, UCS1903, LPD6803, LPD8806, APA102, TM1814, TM1913,P9813, INK1003, DMX512, APA105

B. STA(Station) mode: Controller and phone are in one same WiFi network, in this network, users can operate the controller smoothly. Driver: Low-level SP110E asynchronous BLE driver based on bleak library. Use it only if you know why Controller: High-level SP110E asynchronous controller. Use it only in asynchronous environment (with asyncio)

You can find this controller for very cheap here: https://www.aliexpress.com/item/4000773623427.html?spm=a2g0o.productlist.0.0.4f09329cJ7C1H4&algo_pvid=542e757b-587f-4540-8652-2195883f1349&algo_expid=542e757b-587f-4540-8652-2195883f1349-0&btsid=0bb0622a16012309671478585ed4bd&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ Capture the image’s color you like: The WiFi controller features a creative from-image-to-effect function. It can capture the color of the image, create the distinctive color effect and synchronize light color with the atmosphere of your room.

To flash firmware to the controller, you can use any ESP programmer module or other UART Serial adapter with 3,3V. Connect RX, TX, GND and VCC (3.3V!) between the programmer/power source and the ESP chip. To flash an ESP, you also have to connect GPIO0 to GND at boot time to enable the programming mode instead of starting the flashed firmware. See the corresponding pins at the image provided above. ControllerSync: Synchronous adapter for high-level SP110E asynchronous controller. Handy tool to use from Python shell or synchronous (normal) environmentSupport IC Chip Type: the pixel controller support almost all the one-wire or two-wire LED driver ICs. Such as WS2811/ WS2812B/ WS2813/ SK6812RGB/ SK6812RGBW/ SK6812/ SK9822/ APA102/ LPD8806/ UCS1903 3pin male LED String Light/Panel/Strip etc. (Not support RGB or GRBW led strips without IC)