T-Cut Rapid Scratch Remover, 500 ml

Product Information

The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for?

On the other hand, if you’ve just marked your mum’s brand new motor or you’re returning a lease car and need to deal with a couple of scuffs to avoid penalty charges, you might be more motivated to attempt a repair. How do I apply car scratch remover? Remove the product with a dry, lint-free cloth once it has been sufficiently worked to reveal a swirl-free finish Polish the whole body Once you've finished and the scratch is invisible, you might notice the area you worked on has a slightly different finish to the rest of the car. It could be shinier, dull or just have a bit of haze across it. At this point, we recommend you give your car some TLC and polish the whole body. Does a car polisher do a better job at removing car scratches? The first thing to remember when “T-Cutting” a car is to ensure the paint is completely clean and dry, otherwise, you run the risk of damaging the paintwork when you start polishing it down. Cleaning the surface of your car is incredibly easy and can be done by either running the entire car through a car wash, or thoroughly cleaning and drying the car by hand. Which? Limited is registered in England and Wales to 2 Marylebone Road, London NW1 4DF, company number 00677665 and is an Introducer Appointed Representative of the following:We tested the Halfords 110W Polisher on medium and deep scratches with three compatible car scratch removers.

We also apply a medium and deep scratch to each section to see if the car scratch removers make a difference to these. However, most of the products we test don't claim to remove these types of scratches. Washing after scratches are gone We found that using a polisher didn't do a significantly better job at removing these types of scratches compared to applying the products by hand with a microfibre cloth. Yes, T-Cut can help remove excess lacquer. Lacquer overspray can easily be removed with the Original T-Cut cutting compound. Can it remove spray paint? Step 5: Due to the T-Cut remove the protective layer that coats the paintwork. It should be a priority to regularly wax the vehicle, to avoid it dulling and corroding.

Which T-Cut to use?

After each application, the scratches are examined to see what difference, if any, has been made. The fewer applications needed, the higher the car scratch remover scores. A small amount of T-Cut should be able to remove spray paint from your car paintwork. As with all applications, it needs to be applied very carefully to ensure that further damage is not attributed to the care whilst removing the spray paint. Which T-Cut to use? Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish. Not to mention, through buffing any excess tcut away, you remove any potential damage from unnecessary drips. T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. As mentioned before, T-Cut is only really suitable for removing shallow, surface scratches from a car due to it working by removing the top layer of paint to restore a scratch.

We then wash where each set of scratches are with car shampoo and warm water, either until the scratches reappear or a maximum of five times. Which? are an Introducer Appointer Representative of Optimise Media Limited (FRN 313408), for the introduction of HSBC Group, who are authorised and regulated by the Financial Conduct Authority to provide credit brokering activity. Optimise Media is registered in England and Wales to Exchange Street Buildings, 35-37 Exchange Street, Norwich, England, NR2 1DP and company number 04455319. Sometimes, the first thing that will come to your mind is if you can fix it yourself. Thankfully, there are many products out there that are specifically made for removing scratches, one popular one being T-Cut. Read on to find out the details of the product, including a step-by-step guide on how to use it! What Is T-Cut Scratch Remover and what is it suitable for?

Tips for Effective Use

Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine. Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. LifeSearch Partners Limited (FRN 656479), for the introduction of Pure Protection Contracts, who are authorised and regulated by the FCA to provide advice and arrange Pure Protection Contracts. LifeSearch Partners Ltd is registered in England and Wales to 3000a Parkway, Whiteley, Hampshire, PO15 7FX, company number 03412386.