Xpelair C4HTS 4-inch Simply Silent Contour Extractor Fan Humidistat

Product Information

The C4HTSR range of 4 Inch extractor fans benefit from a range of features which allow them to deliver near silent running. Advanced Ghost™ Air Movement combines long-life silent running motors with precision engineered components alongside advanced air flow management which eliminates irregular air flow paths which can cause noisy extraction. Please be aware that we currently cannot arrange for delivery of this product to the following postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, BT, PO30-41. We found the Best Humidistat Extractor Fan to be the Xpelair C4HTS. It is one of the most popular humidistat extractor fans on the market, runs quietly at just 16dB, has two speed options (15l/s and 21 l/s), features a run-on timer, and more! Are humidity extractor fans any good? A humidistat is a device that measures the level of humidity in the air. When it is installed on an extractor fan, it helps to regulate the amount of moisture in a room or space by automatically turning the fan on or off depending on the humidity level. When the humidity is high, the humidistat will activate the fan to remove excess moisture from the air, which can help prevent mould and mildew growth, reduce odours, and improve indoor air quality. The humidistat also helps to save energy by only running the fan when it is needed, rather than constantly running it at full speed. Overall, the addition of a humidistat to an extractor fan can help to create a more comfortable and healthy living environment. Should I get a bathroom fan with a humidity sensor? Flow straighteners guide air through ducting which reduces turbulence, smoothing and making the air flow laminar.

Then when I got somebody else in it needed new tubing on the inside, the vent on the outside disintergrated when touched so I had to buy the kit for that, and it had to be filled all aroound the openeing because the whole tile had been removed when the old one was put in rather than just a hole cut, which I did.

The best bathroom extractor fans you can buy in 2023

Most domestic bathroom extractors attach to a 100mm hole in the outside wall. If you’re replacing a standard-sized extractor fan, this hole will already be present and you should be able to install the new one yourself. Before you remove the old fan, it’s a good idea to take a photo of its wiring for later reference – and make absolutely sure you shut off the mains power before you take the old one’s front housing off. We tested this with the main isolator switch and if the bathroom light is off, and we turn the fan switch on it starts running immediately. But if the bathroom light is ON and we switch the fan switch from off to on, then it DOESN'T spin. This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product However we've noticed that is is turning off 30 seconds after the bathroom light is turned ON instead of 30 seconds after it's turned OFF.

If you wish to return your item to Robert Dyas, you can do so by the following method: 1. Request a Collection via Robert Dyas Customer Services The Blauberg 100 Quiet Style TH is the perfect solution for those looking for a powerful and stylish fan that won’t break the bank. German-engineered for quality and reliability, this fan boasts a powerful airflow extraction rate of 27 litres per second, making it perfect for use in toilets and bathrooms. This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest. Yes, it is highly recommended to get a bathroom fan with a humidity sensor. This type of fan can detect the level of humidity in the bathroom and automatically turn on and off accordingly. This is important because high humidity levels can cause mould and mildew growth, which can be harmful to your health and damage your bathroom. A bathroom fan with a humidity sensor can also help reduce moisture buildup, prevent condensation on mirrors and walls, and improve air quality. In addition, this type of fan is convenient and energy-efficient, as it only runs when needed. Overall, investing in a bathroom fan with a humidity sensor is a smart choice for maintaining a healthy and comfortable bathroom environment. The PureAir Sense comes with two spigots (or sleeves): one for standard 100mm installation and another for larger 125mm portals. The larger spigot is the one to fit if you want to benefit from its excellent 39l per second flow rate. That said, its standard 32l per second flow rate is still better than most and easily good enough for the majority of bathroom installations.The precise duration of the overrun is normally configured during installation, with most fans offering a range between 30 seconds and 30 minutes. You might as well tend towards the latter end of the scale as the cost is very low: on average, a fan like this uses around 8W. The C4HTSR model benefits from an adjustable over-run timer and a humidistat to automatically regulate humidity levels. The timer can be set at the point of installation between 30 seconds and 30 minutes. The fan comes in a UV-resistant brilliant white finish that will blend seamlessly into any wall or ceiling. The front panel is removable, making cleaning and maintenance a breeze, while the adjustable run-on timer allows you to customize the fan’s operation to your needs. If you don’t already have a fan, you’ll need to get in a qualified builder to make the hole and install the wiring. Be aware that there are regulations governing where your fan can be located: if you want to put a fan in Zone 1 (the area within a shower or 2.25m above a bath) or Zone 2 (60cm from Zone 1), it must be a low-voltage SELV fan with a transformer, or an AC-powered model that’s IPX5-certified. Most of our recommendations below are intended for use outside of Zone 2, but the layout of your bathroom may dictate your options. IPX4 rated, the Simply Silent C4HTSR range is suitable for use in bathrooms, toilets and cloakrooms in Zone 1 if protected by 30mA RCD, otherwise Zone 2 and can be window, wall, ceiling or panel mounted.

Will comply with Building Regulation Parts F and L if installed in accordance with the manufacturer's instructions and by a competent person. Finally, if you think you (or anyone else in the house) will forget to turn the fan on, consider a model with a humidity sensor. This automatically activates the fan when the level of moisture in the air exceeds a certain threshold. This sensor may need occasional cleaning, though, or the accumulation of dust or grime will hinder its effectiveness. What about noise? Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property.Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets Humidity extractor fans can be very effective in reducing excess moisture in a room or area. They work by drawing in humid air and expelling it outside, which can help prevent mould growth, reduce the risk of respiratory problems, and improve overall air quality. However, the effectiveness of a humidity extractor fan depends on several factors, such as the size of the fan, the size of the room, and how often the fan is used. It is also important to properly maintain the fan, including regularly cleaning the filters and ensuring that it is installed correctly. Overall, humidity extractor fans can be a useful tool in managing humidity levels, but it is important to do your research and choose a high-quality fan that is appropriate for your specific needs. We turned the timer down to the lowest so we can better see when/why it's turning off and we put the humidistat to the highest so that presumably it should only go on when we're showing and not running needlessly.