4 Pin Vehicle Reversing Camera 12V/24V,18 LED IR Night Vision CCD Car Rear View Parking Reverse Camera + 4Pin Connector 20m/65ft Extension Cable for Bus Truck Camper Lorry Heavy Duty

Product Information

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you. You may find that one of the wires carries 12 volts to power the IR LEDs in the camera. Another may be used to carry 12 volts to power a small heater, although this is fairly rare in reversing cameras in the UK. I have seen white used as the earth or as the video channel. This kit is supplied with a flush-fitting bumper reverse camera, usually fitted in the bumper but can be mounted anywhere that you can reach the rear to tighten the securing ring up. The camera is supplied with the correct sized hole saw for the camera body (28mm) to facilitate an easy installation. This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.

The camera has either a 600TVL 1/3" Sony CCD image sensor with 90 degree field of view, or a 700TVL 1/3" Sony CMOS image sensor with 120 degree field of view - select the one that matches your needs. Premium Aspheric Lens - means that despite the extra wide angle, it minimises the "fish bowl" effect you see on cheaper cameras.

This reversing camerakit comes with the mirror monitor that clips over your existing interior mirror using spring-loaded clamps.The mirror monitor uses a high quality 7 inch LCD digital panel, that gives great colour and brightness. The monitor can be set up to display guidelines by attaching green wire to reverse light supply and setting them up in the menu system. You can even adjust the position of the guidelines inside the menu system. The next step is to cut off the plug of your failed camera with a good length of cable to help create the adaptor. On one of our 1m 4 pin extension cables cut in half to give you the male connector. You are now going to join your connector of your camera to the male connector from our cable. This reversing camera kit comprises of a bolt type number plate reverse camera, designed to fit to the number plate light area of your vehicle. Plus a top quality high resolution mirror monitor. As well as trying and testing multiple reversing cameras, we also based our recommendations on hours of research and several factors. Some of the factors we considered included the type (wired or wireless), viewing angle, quality of the components supplied, functionality, video quality, ease of installation, warranty and value for money. Conclusion The reversing camera kit + additional camera comes with a rear view mirror monitor display, which is fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.