ANNKE FCD600 Dual Lens Security Camera Outdoor with 180° Viewing Angle, 6MP PoE IP CCTV Camera Support Color & IR Night Vision, Person/Vehicle Detection, Two-Way Talk

Product Information

And last, the other reason you might want to go with a Reolink is that the Duo 1 and Duo 2 come in a ton of other unique varieties like powered wifi, battery wifi, battery cellular, and even a power over ethernet floodlight version that might add enough supplemental light to solve the poor night time performance. I personally prefer a 32:9 image because it tends to look less distorted, but the other big advantage to a 32:9 aspect ratio is that in a multi camera view it neatly takes up two camera positions instead of leaving a blank space in a row, which as my 10 year old would say is “very satisfying”. The EmpireTech B180 does have the option to output in 32:9, but only at a resolution of 3840×1080 which is unfortunately almost a 50% reduction in total resolution when using that format.

Although there are no ventilation holes, there is a speaker located at the bottom of the FCD600 and it’s a fairly loud one, reaching up to 95dB. Paired with the front-facing microphone (from in between the lenses), you can have a two-way conversation with a courier or just scare off a trespasser (and then listen to their faint distant cries). I don't have that camera and to be honest I don't have any IP camera from Annke. But I do have same type Tech from another provider of same tech and I will tell you how I get to my Mask using that camera and you might be able to find it the same place on your own. My camera (again like yours) isn't the easiest to find the Mask area...

So, that means that the Annke NCD800 has the best aspect ratio, the 2 nd best field of view, the best daytime image, and the best nighttime image, so the question is: Is there any reason not to buy it, or more specifically is there any reason you’d choose one of the other dual lens cameras instead?

Sorry looking at mine again it isn't 100% like yours and my placement of my Mask might be different then yours seeing my first one I went to is under PTZ tab of the Camera.. SO I will look at another camera.. Either way you want to look in your cameras WebUI for the mask and it is a setup and forget kind of thing. meaning you only need to worry about turning one once... Applies to: I81FB/I81EB/I81EC/I91BE/I51DJ/I51DB/I51DK/I91BD/I91BF/C800/C500/B1200/NC400/CZ500/ CZ400/ Pano360 Pro Sub StreamWhen WDR is On:50 Hz: 12.5 fps (1920 × 536, 960 × 272)60 Hz: 15 fps (1920 × 536, 960 × 272) To access the Mask you will need to gain access to the cameras WebUI. If you have it connected to your normal Network using a POE Switch or some other Power supply then it will be easier. If you don't and you have it connected to a Annke POE NVR. Then you will have to access the cameras WebUI. This might be a feature of the NVR as it is on my Other Branded NVR through a Virtual Host setting. Once you are able to bring up your Cameras WebUI log into the Camera. Sub Stream When WDR is On:50 Hz: 12.5 fps (1920 × 536, 960 × 272)60 Hz: 15 fps (1920 × 536, 960 × 272)That’s why the footage seems to be during a cloudy afternoon and not at 10:30PM. Well, there is more to that because the camera itself seems to enhance every bouncing photon it captures, so the street is brighter than during the day. Of course, you can tweak it so the light sources aren’t so overblown and dominant. But the main takeaway is that even during the night, the ANNKE FCD600 should be able to see everything that moves; the shadows aren’t too dark, so pretty much all is visible. The video was captured without any light from the camera and, after enabling them, things got better and far more balanced as you can see from the photo. Enabling the LED lights does solve the overblown issue that can be seen in the video. This NVR is connectable to PoE IP cameras of up to 4K resolution. You’re allowed to take full advantage of your cameras and have full control over them.

Additionally, don’t forget to set up the way you wish to be notified and whether the videos should be saved automatically using the Linkage Method – you need to do it for each of the four smart motion detection features. As you can see from the video, it does work nicely, but yes, you do need to take time and configure them which can be a bit complicated for a lot of people (again, Reolink has found a way to do it without it feeling like an intimidating process). ANNKE has been experimenting quite a bit with the design of its dual-lens cameras and, when put next to the regular camera, the ANNKE FCD600 does have a peculiar design. It kind of looks like the Reolink Duo, although it is a tiny bit taller due to the additional LED spotlights. Front view of the ANNKE FCD600.For a running subject at 25ft the results were mostly the same but with each of the Reolink cameras falling one position. That put the FCD600 in last, the Duo 2 in 5 th, the UniView in 4 th, the Empretech in 3 rd, the Duo 1 in 2 nd, and the Annke NCD800 in 1 st. Smart Event Line crossing detection, intrusion detection, region entrance detection, region exiting detection, scene change detection,(support human and vehicle detection) Third, the 2 way talk on the EmpireTech B180 works in blue iris, while the 2 way talk of the Annke and Reolink only work in their manufacturer apps. One of the biggest differences between these cameras is the size and aspect ratio of the video feed that they output. So for comparisons sake here they all are side by side and I’ve adjusted the scale so they all have equal heights. You can see that the Reolink Duo 1, UniView 2K-24, and Annke NCD800 all have ultrawide 32:9 aspect ratios which are essentially two 16:9 images stitched together, except in the Reolink Duo 1, where they arrive in two separate 2560×1440 video streams instead of a single pre-stitched video. The Annke NCD800’s 4 megapixel sensors result in a 5120×1440 resolution image which is 7.3 megapixels, while the uniview’s 2 megapixel sensors give it a total resolution of 3840×1080, or just over 4 megapixels.